Suspensions
•
Remove the dust guard gasket «10».
•
Check the components for wear; re-
place if required.
•
After refitting all the components pro-
ceed with the bearing clearance ad-
justment.
NOTE
FOR BEARINGS, USE THE TYPE OF GREASE INDICATED
IN THE RECOMMENDED PRODUCTS TABLE.
Steering bearing
Check that the ball contact area «1» (on the rotat-
ing seat «2» and on the fixed seat «3»), is not
damaged or too worn. Replace the whole bearing
if necessary.
CAUTION
CHECK THAT THE COMPONENTS ARE IN GOOD CONDI-
TIONS.
CAUTION
APPLY GREASE ON BALL CONTACT AREAS ON BOTH
SEATS («2» AND «3»).
Rear
KEY:
SUSP - 210
ATLANTIC 300 i.e.