ATLANTIC 300 i.e.
Swing-arm
Check frequently the existing clearance among
the engine pin bushings and the engine pin.
To check:
•
Rest the vehicle on its centre stand.
•
Shake the wheel perpendicularly to the
riding direction.
•
If there is clearance, check that all the
components that fix the fulcrum axis
are firmly tightened.
Removal
•
Remove the lower protection.
•
Remove both undertails.
•
Disconnect the spring «1».
•
Fasten the belts to the passenger
handgrip.
•
Tension the belts while lifting the hoist
arm.
CAUTION
FOR SAFETY REASONS, IT IS NECESSARY THE INTER-
VENTION OF A SECOND OPERATOR.
•
Working on the right side, unscrew and
remove the nut «2».
Locking torques (N*m)
Suspensions
SUSP - 213