ATLANTIC 300 i.e.
Removal
•
Position the vehicle on lifting platform,
rest it on its centre stand with the front
wheel jutting out of the platform.
•
Place a support under the chassis.
•
Remove the handlebar.
•
Remove the instrument panel.
•
Remove the legshield.
•
Slide off the brake calliper from the
disc.
•
Unscrew and remove the lock nut «1».
•
Unscrew and remove the nut «2».
Locking torques (N*m)
Lock nut fixing screw 110 ± 20% (81.2 ftlb) Set nut fixing screw 15 ± 20% (11.1 ftlb)
•
Slide off the fork with the front wheel
from the headstock.
NOTE
BE CAREFUL THE LOWER BEARING BALLS DO NOT
COME OUT WHEN SLIDING OFF THE FORK.
•
Slide off and remove the plastic gasket
«3».
•
Remove the rotating seat «4» and the
balls «5» of the upper bearing.
•
Remove the rotating seat «6» and the
balls of the lower bearing 7».
•
Wipe off the grease from all the bearing
components including the fixed seats
«8» and «9».
Suspensions
SUSP - 209