APRILIA Atlantic 300 Service Station Manual page 244

Chassis
LEFT SWITCH REMOVAL
•
Undo and remove the three lower
screws «1».
•
Undo and remove the screw «2».
•
Remove the switch lower cover.
•
Disconnect the light connector «3».
•
Disconnect the turn indicator connec-
tor «4».
•
Disconnect the horn connector «5».
•
Remove the switch upper cover.
Headlight assy.
HIGH-BEAM AND LOW-BEAM BULB RE-
PLACEMENT
Open the glove-box «3» and release the end of
stroke side rods by pressing them down moder-
ately.
•
Hold the bulb connector «4», pull and
disconnect it from the bulb.
•
Turn the bulb holder «5» anticlockwise
and take it out from the parabole fitting.
•
Take out the bulb.
When refitting the bulb:
NOTE
INSERT THE BULB IN THE PARABOLE FITTING SO THAT
THE THREE BULB TABS COINCIDE WITH THEIR SLOTS IN
THE BULB HOLDER.
CHAS - 244
ATLANTIC 300 i.e.