APRILIA Atlantic 300 Service Station Manual page 113

ATLANTIC 300 i.e.
Removing the hub bearings
- Check the status of the bearings being examined (wear, clearance and noise).
Removing the wheel axle bearings
- Remove the seeger ring from the outside of the
hub cover.
- Support the hub cover and expel the bearing.
- Remove the oil seal as shown in the figure using
the specific tool.
Specific tooling
020376Y Adapter handle
020477Y 37-mm Adaptor
020483Y 30 mm guide
AP8140916 Hub cover support
Engine
ENG - 113