APRILIA Atlantic 300 Service Station Manual page 245

ATLANTIC 300 i.e.
•
Place the bulb holder «5» in its para-
bole fitting and turn it clockwise.
•
Connect the bulb connector «4».
TURN INDICATOR BULB REPLACEMENT
•
Remove the front locking.
•
Working from the front part of the vehicle, turn the holder «8» with the bulb «7» clockwise
and extract them from their fitting.
•
Press the bulb «7» slightly and turn it anticlockwise.
•
Take out the bulb from its fitting.
NOTE
INSERT THE BULB IN THE BULB HOLDER SO THAT THE TWO GUIDING PINS COINCIDE WITH
THEIR GUIDES ON THE BULB HOLDER.
•
Install a bulb of the same type ade-
quately.
TURN INDICATOR REMOVAL
•
Remove both fairings.
•
Disconnect the two connectors from
the turn indicator.
Chassis
CHAS - 245