APRILIA Atlantic 300 Service Station Manual page 255

ATLANTIC 300 i.e.
•
Turn anticlockwise and extract the (tail
light/stop light ) bulb «6» or the (turn
indicator) bulb «5».
•
Install a bulb of the same type ade-
quately.
NOTE
UPON REFITTING, PLACE THE GLASS «7» CORRECTLY
INTO PLACE.
CAUTION
PROCEED WITH CAUTION. DO NOT DAMAGE THE TAB
AND/OR ITS SLOTS.
•
Tighten the screws «8» carefully and slightly to avoid damaging the glass «7».
REMOVAL
•
Remove the tail section.
RIGHT
•
Disconnect the connector «1».
•
Slide off the license plate lamp bulb
«2».
•
Undo and remove the three screws
«3».
•
Remove the right headlight assembly.
LEFT
•
Disconnect the connector «1».
•
Undo and remove the three screws
«4».
•
Remove the left headlight assembly.
Chassis
CHAS - 255