Viewing Test Call Statistics - AudioCodes Mediant 4000 SBC User Manual

User's Manual
48.3

Viewing Test Call Statistics

In addition to viewing a brief status description of the test call in the 'Test Status' field (as
described in ''Starting, Stopping and Restarting Test Calls'' on page 686), you can also
view a more detailed status description which includes test call statistics.

To view statistics of a test call:
1. Open the Test Call table (Configuration tab > System menu > Test Call > Test Call
Table).
2. Select the test call table entry whose call statistics you want to view.
3. Click the Show/Hide button; the call statistics are displayed in the Test Statistics
pane located below the table, as shown below:
The 'Test Statistics' pane displays the following test session information:

Elapsed Time: Duration of the test call since it was started (or restarted).

Active Calls: Number of currently established test calls.

Call Attempts: Number of calls that were attempted.

Total Established Calls: Total number of calls that were successfully established.

Total Failed Attempts: Total number of call attempts that failed.

Remote Disconnections Count: Number of calls that were disconnected by the
remote side.

Average CPS: Average calls per second.

Test Status: Displays the status (brief description) as displayed in the 'Test Status'
field (see ''Starting, Stopping and Restarting Test Calls'' on page 686).

Average CPS: Average calls per second.
Version 7.0
Figure 48-2: Viewing Test Call Statistics
687
48. Testing SIP Signaling Calls
Mediant 4000 SBC