8.8.1.4
Control cable terminals "peripheral board 3"
②
Remove the jumper if these control cable terminals are in use.
④
Four-way distribution terminal for 24 V
⑤
In the case of an equipped peripheral board 3 / 4, the supply of the digital inputs ‑X2:8 ... 16 is changed over. The
digital inputs are supplied from ‑X2:1/3 instead of ‑X2:51/55.
Figure 8-34
Control cable terminals for "peripheral board 3" application
Installation and operating instructions Sinamics G180
Operating Instructions, 05/2013, 4BS0751-001
Operation
8.8 Examples / Applications
121