Description
3.1
Updating inverter software or instructions
These operating instructions are valid for SINAMICS G180, software version 00235-R16 and
higher.
Procedure
1. Check the current software version on the inverter display in the menu "I-INVERTER DATA/
2. If the inverter software version is higher than the version of the operating manual, download
3. If the inverter software is no longer current, then update the inverter software by using the
Contact the Service Center of Siemens in Ruhstorf (Page 162) for more detailed information.
3.2
Order numbers / Type designations
The inverters have the following types of identification:
● Order number
● Short designation
● Type code
● Other version designation
Order number
e.g. 6SE0100‑1AG31‑0AA7
The meaning of the icons is as follows:
Example
Designation
6SE01
1. - 5. position: device type, product
group
0
6. position: Mechanical design
0
7. position: Unassigned
‑
Installation and operating instructions Sinamics G180
Operating Instructions, 05/2013, 4BS0751-001
Version".
the current version of the manual from this website (http://www.siemens.com).
software "IMS".
Option
6SE01
0
4
7
8
0
Meaning
Sinamics G180
Compact device with air cooling
Cabinet with compact units
Cabinet unit with water cooling
Cabinet unit with air cooling
All Sinamics G180 industrial inverters
3
27