Mode "Std Sisd - Siemens SINAMICS G180 Installation And Operating Instructions Manual

Operation
8.2 Standard mode settings
8.2.2

Mode "std sisd"

(D)
(S)
Figure 8-4
Operation different from "std siss"
The operation "Speed On" for "Remote" mode is dynamic.
Start the drive with an NO (normally open) contact at –X2:11. You change the inverter speed
to 0 with an NC (normally closed) contact at ‑X2:10.
88
Dynamic: Pushbutton mode
Static: Switch mode
Assignment of the control cable terminals for operation of "std sisd"
Installation and operating instructions Sinamics G180
Operating Instructions, 05/2013, 4BS0751-001