Standards And Guidelines For Proper Use Of Inverters - Siemens SINAMICS G180 Installation And Operating Instructions Manual

2.7

Standards and guidelines for proper use of inverters

Inverters are components which are intended for installation in electrical systems or machines.
Commissioning of the inverters is prohibited until one of the following two conditions is verifiably
fulfilled.
● The machine complies with the requirements of the following directives:
● The electrical installation complies with the requirements of the following directives:
The inverters comply with the requirements of the low-voltage directive 2006/95/EG and the
EMC directive 2004/108/EG.
To ensure that this equipment functions perfectly and safely, observe the following:
● Transportation in accordance with proper procedures
● Proper storage
● Proper installation and assembly
● Careful operation
● Careful maintenance
The unit must only be used for the applications specified in the catalog and only in conjunction
with devices and components recommended and approved by Siemens.
Note
Familiarize yourself with the local safety requirements and national safety guidelines and
always observe them.
Installation and operating instructions Sinamics G180
Operating Instructions, 05/2013, 4BS0751-001
– Machinery directive 2006/42/EG
– EMC directive 2004/108/EG
– Low-voltage directive 2006/95/EG
– EMC directive 2004/108/EG
2.7 Standards and guidelines for proper use of inverters
Safety information
21