Connection For Optional External Display With Rs 485 - Siemens SINAMICS G180 Installation And Operating Instructions Manual

8.4.9

Connection for optional external display with RS 485

You have the option of connecting an external display at ‑X26 or at ‑X51. You can take the
connection assignment for an external display with RS 485 from the following diagrams.
Figure 8-23
In order to be able to issue commands via an external display connected at ‑X51 to the inverter ,
set the corresponding command source in the parameter assignment to "RS 485".
Figure 8-24
The interface ‑X26 is only suitable for locally installing an external display, for instance in the
cabinet door.
In order to be able to issue commands via an external display connected at ‑X26 to the inverter ,
set the corresponding command source in the parameter assignment to "intern".
Installation and operating instructions Sinamics G180
Operating Instructions, 05/2013, 4BS0751-001
External display connected at ‑X51
External display connected at ‑X26
8.4 Controlling the external connections of the inverter
Operation
107