Install The Access Panel; Remove The Dimm Baffles - HPE ProLiant BL460c Gen10 User Manual

4. Press the access panel release button.
5. Slide the access panel towards the rear of the server blade, and then lift to remove the panel.
1

Install the access panel

Procedure
1. Align the access panel with the guides on the server blade in all six places and place the access panel
on top of the server blade.
2. Slide the access panel forward until it clicks into place.
1

Remove the DIMM baffles

The server contains two DIMM baffles.
Procedure
1. Power down the server blade on page 21.
2. Remove the server blade on page 22.
3. Place the server blade on a flat, level work surface.
2
2
Operations 23