D-Link DXS-1210-12TC Reference Manual page 276

-
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
When the optional keyword Interface is entered, the weight configuration for different scheduler (WRR
or WDRR) on the specified interface(s) will be displayed. If the interface is not specified, only the
system-wide map of CoS to queue ID is displayed.
The scheduling mode which is configured by the mls qos scheduler command determines which
weight configuration taking effect. Use the show mls qos interface scheduler command to get the
scheduling mode of an interface.
Example
This example shows how to display the QoS queuing information.
Switch# show mls qos queuing
CoS-queue map:
CoS
---
0
1
2
3
4
5
6
7
Switch#
This example shows how to display the weight configuration for the different scheduler on interface
eth1/0/3.
DXS-1210 Series Smart Managed Switch CLI Reference Guide
interfaces from a previous range. No space is allowed before and after
the comma.
(Optional)Specifies a range of interfaces. No space is allowed before
and after the hyphen.
QID
---
2
0
1
3
4
5
6
7
273