D-Link DXS-1210-12TC Reference Manual page 392

To assign the VLAN by the RADIUS server, the proper parameters should be configured on the
RADIUS server. To use VLAN assignment, RFC3580 defines the following tunnel attributes in
RADIUS packets.
The table below shows the parameters for a VLAN:
RADIUS Tunnel Attribute
Tunnel-Type
Tunnel-Medium-Type
Tunnel-Private-Group-ID
DXS-1210 Series Smart Managed Switch CLI Reference Guide
Description
This attribute indicates the
tunneling protocol(s) to be
used (in the case of a tunnel
initiator) or the tunneling
protocol in use (in the case
of a tunnel terminator).
This attribute indicates the
transport medium being
used.
This attribute indicates group
ID for a particular tunneled
session.
Value
13 (VLAN)
6 (802)
ASCII (VID)
389
Usage
Required
Required
Required