D-Link DXS-1210-12TC Reference Manual page 226

Switch# show ipv6 mld snooping mrouter
VLAN
-----
4094
Total Entries: 3
Switch#
28-15
This command is used to display MLD snooping static group information on the Switch.
show ipv6 mld snooping static-group [GROUP-ADDRESS | vlan VLAN-ID]
Parameters
GROUP-ADDRESS
vlan VLAN-ID
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays the MLD snooping static group information.
Example
This example shows how to display MLD snooping static group information .
Switch#show ipv6 mld snooping static-group
VLAN ID
-------
1
Total Entries: 1
Switch#
28-16
This command is used to display MLD snooping statistics information on the Switch.
show ipv6 mld snooping statistics vlan [VLAN-ID]
DXS-1210 Series Smart Managed Switch CLI Reference Guide
Ports
-----------------------------
1/0/12 (forbidden)
show ipv6 mld snooping static-group
Specifies the group IPv6 address to be displayed.
Specifies the VLAN ID to be displayed.
Group address
---------------
FF1E::1
show ipv6 mld snooping statistics
Interface
------------------------
1/0/1,1/0/5
223