Mld Snooping Commands - D-Link DXS-1210-12TC Reference Manual

28. MLD Snooping Commands

28-1
This command is used to clear the statistic counter of the Switch.
clear ipv6 mld snooping statistics {all | vlan VLAN-ID}
Parameters
all
vlan VLAN-ID
Default
None.
Command Mode
Privilege EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
This command is used to clear the statistic counter of the Switch.
Example
This example shows how to clear all MLD snooping statistics.
Switch# clear ipv6 mld snooping statistics all
Switch#
28-2
This command is used to enable or disable MLD snooping.
ipv6 mld snooping
no ipv6 mld snooping
Parameters
None.
Default
MLD snooping is disabled on all VLAN interfaces.
The MLD snooping global state is disabled by default.
Command Mode
Interface Configuration Mode.
Global Configuration Mode.
Command Default Level
DXS-1210 Series Smart Managed Switch CLI Reference Guide
clear ipv6 mld snooping statistics
Specifies to clear IPv6 MLD snooping statistics for all VLANs and all
ports.
Specifies the VLAN used. If no VLAN is specified, statistics for all
VLANs are cleared.
ipv6 mld snooping
213