D-Link DXS-1210-12TC Reference Manual page 51

PORT MAX-PORT] [TCP-FLAG] [dscp VALUE] [flow-label FLOW-LABEL] [time-range
PROFILE-NAME]
rule [SEQUENCE-NUMBER] {permit | deny} udp {any | host SRC-IPV6-ADDR | SRC-IPV6-
ADDR/PREFIX-LENGTH} [{eq | lt | gt | neq} PORT | range MIN-PORT MAX-PORT] {any | host
DST-IPV6-ADDR | DST-IPV6-ADDR/PREFIX-LENGTH} [{eq | lt | gt | neq} PORT | range MIN-
PORT MAX-PORT] [dscp VALUE] [flow-label FLOW-LABEL] [time-range PROFILE-NAME]
rule [SEQUENCE-NUMBER] {permit | deny} icmp {any | host SRC-IPV6-ADDR | SRC-IPV6-
ADDR/PREFIX-LENGTH} {any | host DST-IPV6-ADDR | DST-IPV6-ADDR/PREFIX-LENGTH}
[ICMP-TYPE [ICMP-CODE] | ICMP-MESSAGE] [dscp VALUE] [flow-label FLOW-LABEL] [time-
range PROFILE-NAME]
rule [SEQUENCE-NUMBER] {permit | deny} {esp | pcp | sctp | protocol-id PROTOCOL-ID}
{any | host SRC-IPV6-ADDR | SRC-IPV6-ADDR/PREFIX-LENGTH} {any | host DST-IPV6-ADDR
| DST-IPV6-ADDR/PREFIX-LENGTH} [fragments] [dscp VALUE] [flow-label FLOW-LABEL]
[time-range PROFILE-NAME]
rule [SEQUENCE-NUMBER] {permit | deny} {any | host SRC-IPV6-ADDR | SRC-IPV6-
ADDR/PREFIX-LENGTH} [any | host DST-IPV6-ADDR | DST-IPV6-ADDR/PREFIX-LENGTH]
[fragments] [dscp VALUE] [flow-label FLOW-LABEL] [time-range PROFILE-NAME]
Standard IPv6 Access List:
rule [SEQUENCE-NUMBER] {permit | deny} {any | host SRC-IPV6-ADDR | SRC-IPV6-
ADDR/PREFIX-LENGTH} [any | host DST-IPV6-ADDR | DST-IPV6-ADDR/PREFIX-
LENGTH][time-range PROFILE-NAME]
no SEQUENCE-NUMBER
Parameters
SEQUENCE-NUMBER
any
host SRC-IPV6-ADDR
SRC-IPV6-ADDR/PREFIX-
LENGTH
host DST-IPV6-ADDR
DST-IPV6-ADDR/PREFIX-
LENGTH
tcp, udp, icmp, esp, pcp ,sctp
dscp VALUE
lt PORT
gt PORT
eq PORT
neq PORT
range MIN-PORT MAX-PORT
PROTOCOL-ID
ICMP-TYPE
DXS-1210 Series Smart Managed Switch CLI Reference Guide
Specifies the sequence number. The range is from 1 to 65535. The
lower the number is, the higher the priority of the permit/deny rule.
Specifies any source IPv6 address or any destination IPv6 address.
Specifies a specific source host IPv6 address.
Specifies a source IPv6 network.
Specifies a specific destination host IPv6 address.
Specifies a destination IPv6 network.
Specifies the Layer 4 protocol type.
(Optional) Specifies the matching traffic class value in IPv6 header.
The range is from 0 to 63, or select the following DSCP name: af11 -
001010, af12 -001100, af13 - 001110, af21 - 010010, af22 - 010100,
af23 - 010110, af31 - 011010, af32 - 011100, af33 - 011110, af41 -
100010, af42 - 100100, af43 - 100110, cs1 - 001000, cs2 - 010000,
cs3 - 011000, cs4 - 100000, cs5 - 101000, cs6 - 110000, cs7 - 111000,
default - 000000, ef – 101110.
(Optional) Specifies to match if less than the specified port number.
(Optional) Specifies to match if greater than the specified port number.
(Optional) Specifies to match if equal to the specified port number.
(Optional) Specifies to match if not equal to the specified port number.
(Optional) Specifies to match if fall within the range of ports.
(Optional) Specifies the protocol ID. The valid value is from 0 to 255.
(Optional) Specifies the ICMP message type. The valid number of the
message type is from 0 to 255.
48