D-Link DXS-1210-12TC Reference Manual page 340

None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the boot configuration file and the boot image setting.
Example
This example shows how to display system boot information.
Switch# show boot
Boot image: image1
Boot config: config1
43-5 show running-config
This command is used to display the commands in the running configuration file.
show running-config
Parameters
None.
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 15.
Usage Guideline
This command displays the current running system configuration.
Example
This example shows how to display the content of the running configuration file.
DXS-1210 Series Smart Managed Switch CLI Reference Guide
337