D-Link DXS-1210-12TC Reference Manual page 215

Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
If this command is used without specifying a session number, all monitor sessions are displayed.
Example
This example shows how to display a created port monitor session with the session number 1.
Switch# show monitor session 1
Session: 1
Session Type: local session
Destination Port: eth1/0/3
Source Port:
Both:
RX:
TX:
total entries: 1
Switch#
DXS-1210 Series Smart Managed Switch CLI Reference Guide
eth1/0/7
eth1/0/8
eth1/0/9
eth1/0/10
212