D-Link DXS-1210-12TC Reference Manual page 244

Use this command without parameters to display the sessions associated with all ports.
Example
This example shows how to display sessions on Ethernet port 1/0/1.
Switch# show authentication sessions interface eth 1/0/1
Interface: eth1/0/1
MAC Address: 00-16-76-35-1A-38
Authentication VLAN: 1
Authentication Username: Administrator
Assigned Priority: 0
Assigned Ingress Bandwidth : 0 kbps
Assigned Egress Bandwidth
802.1X Authenticator State: HELD
802.1X Backend State : IDLE
Total Authenticating Hosts: 0
Total Authenticated Hosts: 1
Total Blocked Hosts: 0
Switch#
Display Parameters
Interface
MAC Address
Authentication VLAN
Authentication State
Accounting Session ID
Authentication Username
Client IP Address
Assigned VID
Assigned Priority
Assigned Ingress Bandwidth
Assigned Egress Bandwidth
Method
State
DXS-1210 Series Smart Managed Switch CLI Reference Guide
: 0 kbps
The authentication host received interface.
The MAC address of authentication host.
The original VLAN of the host start authentication.
The authentication status of host.
Start: Host received, but no any authentication start.
Initialization: Authentication resource ready, but no new
authentication start.
Authenticating: Host is under authenticating.
Failure: Authentication failure.
Success: Host pass authentication.
The accounting session ID that used to do accounting after
authenticated.
It indicates the user name of host. It's not available while the host is
selected by MAC-Auth.
It indicates the address of the client associates. It's only available while
the host is selected by Web-Auth or JWAC.
Effectively assigned VLAN ID that was authorized after the host
passed authentication.
Effectively assigned priority that was authorized after the host passed
authentication.
Effectively assigned ingress that was authorized after the host passed
authentication.
Effectively assigned egress that was authorized after the host passed
authentication.
The Authentication method, such as 802.1X, MAC-Auth, Web-Auth,
JWAC,and so on.
The method authentication state.
241