D-Link DXS-1210-12TC Reference Manual page 71

EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays information about the session-timeout.
Example
This example shows how to display session-timeout.
Switch# show session-timeout
Web Session Timeout
Telnet Session Timeout
Console Session Timeout
Switch#
5-22
This command is used to display information about the http or telnet service port.
show ip {http | telnet} service-port
Parameters
http
telnet
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays information about the http or telnet service port.
Example
This example shows how to display http service port.
Switch# show ip http service-port
IP HTTP server port : 80
Switch#
5-23
This command is used to specify an access list to restrict the access to ping switch. Use the no form
of the command to remove the access list check.
DXS-1210 Series Smart Managed Switch CLI Reference Guide
(second): 36000
(minute): 30
(minute): 30
show ip {http | telnet} service-port
Specifies the http service port.
Specifies the telnet service port.
ping access-class
68