Skoda FABIA 2000 Workshop Manual page 9

FABIA 2000 1.4/55; 1.4/74 Engine - Mechanical Components
10 – Removing and Installing Engine
10-1 Removing and Installing
Engine
Removing engine
Special tools, test and measuring equipment and
auxiliary items required
♦ Lifting device, e.g. -MP 9-201-
♦ Tensioning block -MP 9-101-
♦ Engine mount -MP 1-202-
♦
Workshop crane, e.g. - V.A.G 1202 A-
♦
Catch pan, e.g. -V.A.G 1306 -
♦ Grease -G 000 100- (for vehicles with gearbox)
♦ Cable strap
Removing
Note
All cable straps that have been loosened or cut open
when the engine was removed must be fitted again in the
same location when the engine is installed again.
–
First check whether a radio set with anti-theft coding
has been fitted. If this is the case obtain coding.
–
Disconnect the earth strap from the battery with the ig-
nition off.
–
Disconnect positive cable in fuse holder at battery -ar-
row-.
–
Remove cable from battery to fuse holder at battery
and place to the side.
–
Remove battery tray and take battery out of battery
box.
–
Remove battery box -arrows-.
–
Disconnect the positive wire from the battery to the
starter (is removed together with the engine/gearbox
unit).
Edition 09.03
S00.5306.04.20
Removing and Installing Engine
10
S10-0110
S27-0064
10-1 1
page