Skoda FABIA 2000 Workshop Manual page 67

FABIA 2000 1.4/55; 1.4/74 Engine - Mechanical Components
17 – Lubrication
17-1 Removing and installing
parts of the lubrication
system
Note
The engine oil level must never exceed the max. marking
- risk of damage to catalytic converter! ⇒ Inspection and
Maintenance.
Inspecting oil pressure ⇒ 17-1 page 6.
Oil level and oil specification ⇒ Inspection and Mainte-
nance.
Lubrication system - Overview of components
1 - From air filter
2 - Non-return valve
only engines with the engine
codes BBY, BBZ, BKY
3 - 10 Nm
4 - Oil separator
Design for engines with the
engine codes AUA, AUB
5 - To air filter
for engines with the engine
codes AUA, AUB
6 - 10 Nm
7 - Cap
Replace seal if damaged
8 - Dipstick
oil level must not exceed
max. marking
Inspect oil level ⇒ Inspection
and Maintenance
9 - Filler funnel
10 - Guide tube
11 - Main drive-toothed belt
before removing mark run-
ning direction
check for wear
do not kink
removing and installing, ten-
sioning ⇒ Chapter 13-1
12 - Guide pulley
13 - Gasket
replace
must be positioned on dowel sleeves
14 - Oil filter
slacken at hexagon
tighten by hand
Edition 05.05
S00.5306.06.20
Removing and installing parts of the lubrication system
17
17-1 1
page