Skoda FABIA 2000 Workshop Manual page 31

FABIA 2000 1.4/55; 1.4/74 Engine - Mechanical Components
–
Press in gasket ring with pressure plate -T 10022/1-
up to the stop.
–
Installing the main drive - toothed belt ⇒ Chap. 13-1.
Removing and installing drive plate
Special tools, test and measuring equipment and
auxiliary items required
♦ Pressure pad -MP 1-221-
♦ Hexagon screw M8x45 and two nuts M10
♦ Depth gauge
Releasing and tightening the drive plate
–
Attach counterholder -MP 1-221- with M8x45 bolt to
the drive plate. Place two M10 nuts between the coun-
terholder and the driver disc. Fitting position of the
counterholder: A - to release, B - to tighten.
Installing the drive plate
–
Insert the drive plate using the washer with recesses
-1-.
–
Insert new bolts -3- and tighten to 30 Nm.
Edition 05.05
S00.5306.06.20
Removing and installing cylinder block
B
MP 1-221
A
S13-0300
2 1
S13-0301
13-2
page
13
3
3