Skoda Fabia Owner's Manual

Skoda Fabia Owner's Manual

Skoda fabia
Hide thumbs Also See for Fabia:
Table of Contents

Advertisement

SIMPLY CLE VER
ŠkodaFabia
OWNER'S MANUAL

Advertisement

Table of Contents
loading

Summary of Contents for Skoda Fabia

  • Page 1 SIMPLY CLE VER ŠkodaFabia OWNER'S MANUAL...
  • Page 2 Introduction You have opted for a Škoda - our sincere thanks for your confidence in us. Your new Škoda offers you a vehicle featuring the most modern engineering and a wide range of equipment which you will undoubtedly wish to use to the full during your daily motoring. That is why, we recommend that you read this Owner's Manual attentively to enable you to become familiar with your car and all that it offers as quickly as possible.
  • Page 3 Introduction  On-board literature Vehicle data;  The on-board literature for your vehicle consists of this “Owner's Manual” Service intervals;  as well as a “Service schedule” and a “Help on the road”. There can also be Overview of the service work; a variety of other additional operating manuals and instructions on-board ...
  • Page 4: Table Of Contents

    Contents Contents Layout of this Owner's Manual Lights and Visibility Shifting (manual gearbox) ..........Handbrake .
  • Page 5 Contents Technical Data Transporting children safely Fuel ............. . .
  • Page 6 Contents Using the system Safety Driving Tips General Maintenance Breakdown assistance Technical Data...
  • Page 7: Layout Of This Owner's Manual (Explanations)

    Layout of this Owner's Manual (explanations) Layout of this Owner's Manual (explanations) The Owner's Manual has been systematically designed, in order to make it easy for you  The section is continued on the next page. to find and absorb the information you require. Notes Chapters, table of contents and subject index All four kinds of notes, which are used in the text, are always stated at the end of the...
  • Page 8: Using The System

    Using the system Using the system Safety Driving Tips General Maintenance Breakdown assistance Technical Data...
  • Page 9 Cockpit Fig. 1 Certain items of equipment shown in the illustration are only fitted to particular model versions or are optional items of equipment.
  • Page 10: Cockpit

    Cockpit Cockpit General view Switch depending on equipment fitted:  Unlocking the boot lid* ........This overview will help you to quickly familiarise yourself with the ...
  • Page 11: Quick Reference Guide

    Quick Reference Guide Quick Reference Guide Basic functions and important information Setting steering wheel position Introduction The chapter of the brief instruction is only used as a quick reference of the most important operating elements of the vehicle. It is necessary to observe all the information which is contained in the following chapters of the Owner's Manual.
  • Page 12 Quick Reference Guide Adjusting the front seats WARNING (continued)  For safety reasons the lever must always be firmly pushed up to avoid the steering wheel altering its position unintentionally when driving - risk of accident! Seat belt height adjuster Fig.
  • Page 13 Quick Reference Guide Turn signal and main beam lever  Heating of the external mirror  Adjusting the left-hand exterior mirror  Adjusting the right-hand exterior mirror  Switching off operating control Further information  page 57, “Rear mirror”. Fig. 8 Turn signal and main beam lever Switching lights on and off Turn signal light right Turn signal light left...
  • Page 14 Quick Reference Guide Refuelling Slow wipe Fast wipe one time wipe Automatic wipe/wash Rear window wiper Intermittent wipe - every 6 seconds Automatic wipe/wash Further information  page 55, “Windshield wiper”. Fig. 11 Right rear side of the vehicle: Fuel filler flap / fuel filler flap with cap unscrewed Power windows* ...
  • Page 15 Quick Reference Guide Opening the bonnet Fig. 13 Radiator grille: Locking lever / securing the bonnet with the bonnet support  fig. 13 – Pull on the locking lever - left, the bonnet is then unlocked. – Take the bonnet support out of its holder and set it in the opening designed for it ...
  • Page 16: Instruments And Warning Lights

    Instruments and warning lights Instruments and warning lights Overview of the instrument cluster Fig. 15 Instrument cluster Engine revolutions counter  page 15 Button for:  Reset trip counter for distance driven Display  with counter for distance driven  page 17 ...
  • Page 17: Speedometer

    Instruments and warning lights Shift into the next higher gear or select the selector lever position D of the automatic The operating range gearbox before reaching the red zone of the rev counter scale. The engine has reached its operating temperature as soon as the pointer moves into the mid-range of the scale.
  • Page 18: Counter For Distance Driven

    Instruments and warning lights Service Interval Display Caution Never run the fuel tank completely empty! The irregular supply of the fuel system can lead to irregular running of the engine. Unburnt fuel may get into the exhaust system and damage the catalytic converter. Counter for distance driven The counter for the distance driven is located in the bottom area of the display.
  • Page 19: Digital Clock

    Instruments and warning lights  On vehicles which are equipped with information display*, you can call up this infor- The data displayed is the same after resetting the display with flexible service inter- mation in the menu SETUP  page 23. vals (QG1) using the reset button as that for a vehicle with fixed service intervals (QG2).
  • Page 20: Multi-Functional Indicator (Onboard Computer)

    Instruments and warning lights  In order to minimise the fuel consumption, a recommendation for shifting into If the display of the second speed is activated in mph, the current speed* is not another gear is indicated in the display. indicated in km/h on the display.
  • Page 21 Instruments and warning lights  The total-trip memory will not, contrary to the single-trip memory, be deleted after a average fuel consumption;  period of interruption of driving of 2 hours. distance driven;  average speed; Note  driving time. All information in the memory 1 and 2 is erased if the battery of the vehicle is You can only operate the multi-functional indicator when the ignition is switched on.
  • Page 22: Average Fuel Consumption

    Instruments and warning lights Current fuel consumption If the memory is set to zero (after disconnecting the battery), the fuel consumption of 10 ltr./100 km is calculated for the range; afterwards the value is adapted accordingly to the style of driving. The current fuel consumption level is shown in the display in litres/100 km.
  • Page 23: Maxi Dot Display (Information Display)

    Instruments and warning lights MAXI DOT display (information display)* Warning against excessive speeds* Introduction The information display provides you with information in a convenient way concerning the current operating state of your vehicle. The information system also provides you with data (depending on the equipment installed in the vehicle) relating to the radio, mobile phone, multi-functional indicator, navigation system, the unit connected to the MDI input and the automatic gearbox.
  • Page 24: Auto Check Control

    Instruments and warning lights Main menu Note  If warning messages are shown in the information display  page 23, these messages can be confirmed with the button on the windshield wiper lever in order to call up the main menu. ...
  • Page 25 Instruments and warning lights Yellow symbols Shown in the menu Vehicle status, if there is at least one error message. After selecting this menu the first of the error messages is displayed. Several error messages are A yellow symbol signals a warning. shown on the display under the message e.g.
  • Page 26 Instruments and warning lights Language Here you can set in which language the warning and information texts should be displayed. Displays of the MFA Here you can switch off or on certain displays of the multi-functional indicator. Time Here you can set the time, the time format (12 or 24 hour indicator) and the time change summer/winter time.
  • Page 27: Warning Lights

    Instruments and warning lights Warning lights Overview The warning lights indicate certain functions or faults. Fig. 22 Instrument cluster with warning lights    page 28 Fog lights*  page 27 Turn signal lights (to the left)   ...
  • Page 28 Instruments and warning lights  WARNING  page 29  Engine oil If you do not pay attention to the warning lights coming on and the corre-  sponding descriptions and warning notes, this may result in severe body inju- ries or major vehicle damage.
  • Page 29 Instruments and warning lights Rear fog light  Electrohydraulic power steering   comes on when the rear fog lights are operating  page 50.  The warning light The warning light comes on for a few seconds when the ignition is switched on. If the warning light after switching on the ignition or when driving lights up continu- Bulb failure ...
  • Page 30 Instruments and warning lights Glow plug system  (diesel engine) If the coolant is within the specified range, the increased temperature may be caused by an operating problem at the coolant fan. Check the fuse for the coolant fan, replace it if necessary ...
  • Page 31 Instruments and warning lights 3 peeps sound as an additional warning signal. WARNING (continued) Do not continue your journey if for some reason it is not possible under the condi-  The red oil pressure light  is not an oil level indicator! One should there- tions prevailing to top up with oil.
  • Page 32 Instruments and warning lights Traction control system (TCS)*  Traction control system (TCS)*    The warning light lights up if the TCS system is switched off. The warning light comes on for a few seconds when the ignition is switched on. Further information about the TCS ...
  • Page 33 Instruments and warning lights Note WARNING (continued)  If the battery has been disconnected and reconnected, the warning light comes on  If the brake fluid is at the correct level, the ABS control function has failed. after switching on the ignition. The warning light must go out after driving a short The rear wheels may then block very rapidly when braking.
  • Page 34 Instruments and warning lights If the passenger front airbag has been switched off using the switch (for WARNING switching off airbags)* in the end face of the dash panel on the front passenger  side: Pay attention to the following instructions before checking the brake fluid level and opening the bonnet ...
  • Page 35 Instruments and warning lights WARNING  If you do not pay attention to the warning light coming on and the corre- sponding descriptions and warning notes, this may result in injuries or major vehicle damage.  Always adjust your speed to suit weather, road, region and traffic condi- tions.
  • Page 36: Unlocking And Locking

    Unlocking and locking Unlocking and locking  Keep the groove of the keys absolutely clean as impurities (textile fibres, dust etc.) have a negative effect on the proper operation of the locking cylinder and the ignition lock. Description Note Please approach an authorised Škoda Service Partner if you lose a key since he can obtain a new one for you.
  • Page 37: Locking / Unlocking

    Unlocking and locking Locking from inside For the sake of the environment All closed vehicle doors are locked by pressing in the securing knobs from the inside. Dispose of a used battery in accordance with environmental regulations. The doors cannot be opened from the outside when the securing knobs have been pressed in.
  • Page 38: Central Locking System

    Unlocking and locking Switching child safety lock on If the indicator light first of all flashes fast for about 2 seconds, afterwards lights up for about 30 seconds and then flashes slowly, there is a fault in the system of the central –...
  • Page 39 Unlocking and locking  Emergency locking of the door  page 39. Unlocking the vehicle using the key  Emergency unlocking of the boot lid  page 40. Safe securing The central locking system is equipped with a safe securing system.
  • Page 40 Unlocking and locking   All the doors and the boot lid are locked. It is not possible to open the doors or the boot lid from the outside (safety feature,  e.g. when stopping at traffic lights etc.). The switched on interior lights go out over the door contact. ...
  • Page 41 Unlocking and locking Locking A handle which makes the closing easier is located on the inner paneling of the boot lid.  page 39, fig. – Remove the panel – Insert the key into the opening under the panel and press the stopping lever WARNING far as the stop toward the inside.
  • Page 42: Remote Control

    Unlocking and locking Unlocking and locking the vehicle – Fold one of the outer rear seats forwards. – Move the operating lever with the aid of a narrow object, e.g. a screwdriver, up to  page 40, fig. 30 the stop in the direction of arrow and then unlock in the direction of arrow –...
  • Page 43: Anti-Theft Alarm System

    Unlocking and locking  The safe securing system along with the anti-theft alarm system* are, however, deac- pressing of the button means that the door will unlock with the key within 1 tivated during these 30 seconds. minute. When the vehicle is unlocked or locked, the interior lights in the door contact are auto- matically switched on or off.
  • Page 44: Interior Monitor* And Towing Protection Monitoring

    Unlocking and locking  A drop in voltage of the on-board power supply. vehicle interior or if the vehicle must be transported (e.g. by train or ship) or towed, might trigger the alarm. An alarm is immediately triggered if either of the two battery terminals is disconnected while the anti-theft alarm system is activated.
  • Page 45: Electrical Power Windows

    Unlocking and locking Electrical power windows* Button for the power window in the front passenger's door Button for the power window in the rear door on the right* Buttons for electrical power windows Button for the power window in the rear door on the left* Safety pushbutton* Safety pushbutton* You can deactivate the buttons for power windows at rear doors by pressing the safety...
  • Page 46 Unlocking and locking  Opening a window After switching the ignition off, it is still possible to open or close the windows for a further 10 minutes. The power windows are switched off completely once you open – Hold the key in the locking cylinder of the driver's door in the unlock position or the driver or front passenger door.
  • Page 47: Electric Sliding/Tilting Roof

    Unlocking and locking  fig. 34 Operation in winter The sliding/tilting roof is operated by means of the control dial and only func- tions when the ignition is switched on. The control dial has several positions. Ice accumulating on the surface of the windows during the winter may result in a greater resistance when closing the windows and the window may stop and go down After switching the ignition off, it is still possible to open, close and tilt the sliding/tilting several centimetres...
  • Page 48 Unlocking and locking Closing Emergency operation Sliding closed/closing the sliding/tilting roof  page 46, fig. – Turn the switch to position Safety closing The sliding/tilting roof is fitted with a force limiter. The sliding/tilting roof stops and moves back several centimetres when it cannot be closed because there is something in the way (e.g.
  • Page 49: Lights And Visibility

    Lights and Visibility Lights and Visibility Lights WARNING Never drive with side lights on - risk of accident! The side lights are not bright  Switching lights on and off enough to light up the road sufficiently in front of you or to be seen by other oncoming traffic.
  • Page 50 Lights and Visibility  page 48, fig. 36 – Turn the light switch into position O - left. In some countries, the national legal provisions require that the rear parking lights also come on together with the separate lights* for daylight driving lights when activating ...
  • Page 51 Lights and Visibility  page 48. Switching on the fog lights – Turn the light switch to the position   fig. – Engage the reverse gear (manual gearbox) or move the selector lever into the posi- – First of all turn the light switch into position ...
  • Page 52 Lights and Visibility If the vehicle is not fitted with fog lights*, the rear fog light is switched on by turning the All seats occupied, luggage compartment laden. light switch to the position  and is pulled out directly to the position .
  • Page 53 Lights and Visibility The turn signal   and main beam lever  Parking light  – Switch off the ignition. The parking lights and headlight flasher are also switched on and off using the turn signal and main beam lever. –...
  • Page 54: Interior Lighting

    Lights and Visibility Interior lighting The interior lighting is switched off after about 10 minutes when a door has been left open in order to avoid discharging the battery of the vehicle. Lighting of the interior of the vehicle front/rear* - typ 1 Front interior lighting - without reading lights Fig.
  • Page 55: Visibility

    Lights and Visibility  page 53, fig. The rear interior lighting is operated by pressing the button If the on-board voltage drops, the rear window heater is switched off automatically, the warning light flashes in the button. The button has two positions for the interior lighting at the rear. In the first position, the interior lighting is switched on permanently, in the second position (after pressing) it is For the sake of the environment switched via the door contacts.
  • Page 56: Windshield Wiper And Wash System

    Lights and Visibility Windshield wiper and wash system Automatic wipe/wash for windscreen – Pull the lever towards the steering wheel into the spring-tensioned position Windshield wiper the wash system and the windscreen wipers will operate. – Release the lever. The windscreen wash system stops and the wiper continues for You can operate the windscreen wipers and automatic wipe/wash another 1 - 3 wiper strokes (depending on the period of spraying of the wind- using the windscreen wiper lever.
  • Page 57 Lights and Visibility Replacing wiper blades for the windscreen wipers WARNING (continued)  Do not use the windscreen washer system at low temperatures, without heating the windscreen beforehand. Otherwise the window cleaner could freeze on the windscreen and restrict the view to the front. ...
  • Page 58: Rear Mirror

    Lights and Visibility Rear mirror WARNING (continued) You can adjust the exterior mirrors electrically*.  You should clean the wiper blades regularly with a windscreen cleaner in order to avoid any smears. Clean a wiper blade with a sponge or cloth if it is very dirty, for example from insect residues.
  • Page 59 Lights and Visibility The exterior mirror heater only operates when the engine is running. WARNING  Convex (curved outward) or spherical (differently curved) exterior mirrors increase the vision field. They do, however, make objects appear smaller in the mirror. These mirrors are only of limited use, therefore, for estimating distances to the following vehicles.
  • Page 60: Seats And Storage

    Seats and Storage Seats and Storage Front seats WARNING (continued) protect you - hazard! The front seats and the head restraints must always also Basic information be correctly adjusted to match the body size of the occupant.  Ensure that there are no objects in the footwell as any objects may get The front seats have a wide range of different settings and can thus be matched to the behind the pedals during a driving or braking manoeuvre.
  • Page 61: Head Restraints

    Seats and Storage Adjust the angle of the seat backrest Adjusting the height of a head restraint – Relieve any pressure on the seat backrest (do not lean on it) and turn the hand- – Grasp the side of the head restraint with both hands and push the head restraint in wheel to adjust the angle of the backrest.
  • Page 62: Heating The Front Seats

    Seats and Storage Heating the front seats* Note The seat heating should only be switched on when the engine is running. This has a significant effect of saving on the battery capacity. Rear seats Folding the rear seats forwards Fig. 52 Rocker switch: Front seat heating You can electrically heat the seat cushions and the seat backrests of the front seats.
  • Page 63 Seats and Storage Inserting head restraints in the seat cushions – The head restraints can be inserted into the relevant holes of the folded forward  fig. seat cushions – Fold the seat backrests fully fowards. Move seats into the initial position –...
  • Page 64: Pedals

    Seats and Storage Installing energy depends on the speed at which the vehicle is travelling and on the weight of the object. The speed at which the vehicle is travelling is in this case the more significant – Press the wire clamps in the direction of the arrow and place it in its holder. factor.
  • Page 65 The fixing nets* for small items of luggage and the installation instruction are located in the luggage compartment. WARNING Fig. 56 Luggage compartment: Lashing eyes and fastening elements (Fabia) / (Combi)  The whole strength of the net makes it possible to load the pocket with objects of up to 5 kg in weight.
  • Page 66 Fig. 58 Luggage compartment: folding Fig. 59 Remove / install the luggage compartment cover hook (Fabia) The luggage compartment cover can be removed as required if one must transport Folding hooks for attaching small items of luggage, such as bags etc., are provided on bulky goods.
  • Page 67 Seats and Storage The luggage compartment cover can also be put into the lower position on the Caution  fig. 60 supporting elements - left. When closing the boot lid, jamming and damage to the luggage compartment cover or  fig. 60 The luggage compartment cover can also be stowed behind the rear seats the side trim panel can occur if handled in an unprofessional way.
  • Page 68: Variable Loading Floor In The Luggage Compartment* (Combi)

    Seats and Storage – You can fold together the variable loading floor by moving it in the direction of the WARNING arrow. No objects should be placed on the luggage compartment cover, the vehicle  fig. 62 – Lift up the variable loading floor in direction of arrow and take out the occupants could be endangered if there is sudden braking or the vehicle ...
  • Page 69: Net Partition* (Combi)

    Seats and Storage Remove carrier rails The luggage compartment can be divided with the variable loading floor. – Slacken the check points on the carrier rails using the vehicle key or a flat screw- – Lift up the part with the holder and secure it by sliding it into the grooves ...
  • Page 70 Seats and Storage Folding – Fold the surfaces of the seats and seat backrests of the rear seats forward.  fig. – Pull the cross rod back slightly, first on the one side then on the other side and take –...
  • Page 71: Bicycle Holder In The Luggage Compartment

    Seats and Storage – Fold the surfaces of the seats and seat backrests of the rear seats forward. First the – Position the cross member with the fixed (not pulled out) part onto the right (in right then the left backrest. direction of travel) lashing eye and then the pull out part onto the left lashing eye.
  • Page 72 Seats and Storage Put bicycle into the bicycle carrier – Perform the installation of the second fixture and the attachment of the bicycle analogously. WARNING Place the bicycles in the bicycle carrier in such a position that no collision between the steering arm and the side and/or rear window can occur. Note If the front wheel is equipped with disc brake, attach the wheel in such a way that the brake disc is opposite the frame.
  • Page 73: The Roof Rack

    Seats and Storage – If it is necessary, the position of the bicycles in the vehicle can be additionally recti- For the sake of the environment fied. The increased aerodynamic drag results in a higher fuel consumption. WARNING Note  When transporting passengers and objects, which require the seats to be If a roof rail is not fitted onto a vehicle at the works, it is obtainable from a specialist folded forwards, ensure the safety of the passengers being transported.
  • Page 74: Front Cup Holder

    Seats and Storage You cannot make full use of the permissible roof load if you use a roof luggage rack Caution system with a lower load carrying capacity. The load transported on the roof luggage Do not open the beverages in the cup holder while driving. There is a risk of spilling e.g. rack system must not exceed the weight limit which is stated in the fitting instructions.
  • Page 75: Parking Ticket Holder

    Seats and Storage Parking ticket holder WARNING Never lay flammable objects in the ashtray basin - risk of fire! Cigarette lighter* and power sockets* Cigarette lighter You can also use the socket on the cigarette lighter for other electrical Fig. 75 Windscreen: Parking ticket appliances.
  • Page 76: Storage Compartments

    Seats and Storage The same remarks apply here as for  page 74. WARNING Further information  page 184, “Accessories, changes and replacement of parts”.  Take care when using the cigarette lighter! Not paying proper attention or incorrect use the cigarette lighter in an uncontrolled manner may result in burns.
  • Page 77 Seats and Storage Storage compartments on the front passenger side* Cooling of storage compartment on front passenger side* The storage compartment can be fitted for vehicles with an air-condi- tioning system with a closable inlet for cooled air. Fig. 79 Dash panel: Storage compart- ments on the front passenger side Fig.
  • Page 78 Seats and Storage Storage compartment for spectacles* Storage compartment in the front seat* Fig. 82 Detail of the headliner: Storage Fig. 84 Front seat: Storage compart- compartment for spectacles ment – Press on the lid of the stowage compartment, the stowage compartment opens The storage compartment is foreseen for storing small objects of up to 1 kg.
  • Page 79 Seats and Storage Opening storage compartment Removeable storage compartments* in the luggage compartment  page 77, – Press the top button and fold up the cover of the storage compartment fig. 85 on the right. Note The moving space of the arms can be restricted if the armrest is folded down. In city traffic the armrest should not be folded down.
  • Page 80 Seats and Storage – Press the upper corners to the inside and release the storage compartment by pulling upwards. – Take it out by pulling towards the middle of the vehicle. Installing – Insert both ends of the flexible storage compartment into the openings of the right side trim panel of the luggage compartment and push it downwards until it locks.
  • Page 81: Heating And Air Conditioning System

    Heating and air conditioning system Heating and air conditioning system Air outlet vents Warmed, unwarmed or cooled air will flow out of the air outlet vents according to the setting of the regulator of the heating or the air conditioning system* and the atmos- The information provided is valid for all vehicles.
  • Page 82: Heating

    Heating and air conditioning system Heating The air inlet in front of the windscreen must be free of ice, snow or leaves in order to ensure that the heating and ventilation systems operate properly. Using the system All controls apart from the control dial can be set to any desired intermediate posi- tion.
  • Page 83 Heating and air conditioning system Set heating Recommended settings of heating controls for: Setting of the control dial Setup Air outlet vents 3 Air outlet vents 4 Button Defrosting the windscreen and To the right up to Open and align with the side ...
  • Page 84: Climatic (Semi-Automatic Air Conditioning System)

    Heating and air conditioning system Climatic (semi-automatic air conditioning system)* After switching on the cooling Condensation from the evaporator of the air condi- tioning may drip down and form a puddle below the vehicle. This is quite normal and not an indication of a leak! Description Climatic is a combined cooling and heating system with electronic WARNING...
  • Page 85 Heating and air conditioning system  Setting temperature If the cooling system has not been switched on for a lengthy period, odours may be produced at the evaporator because of deposits. Switch the air conditioning system  fig. 91 – Turn the control dial to the right in order to increase the temperature.
  • Page 86 Heating and air conditioning system Set Climatic Recommended settings of Climatic controls for the respective operating modes: Setting of the control dial Button Setup Air outlet vents 4 Defrosting the windscreen and Recommended Open and align with the side  Do not switch on Switched off side windows...
  • Page 87: Climatronic* (Automatic Air Conditioning)

    Heating and air conditioning system Climatronic* (automatic air conditioning) Using the air conditioning system economically The compressor on the Climatic uses power from the engine when in cooling mode Description which will effect the fuel consumption. The Climatronic system is a combination of an automatic heating, fresh It recommended to open the windows or the doors of a vehicle for which the interior air and cooling system which provides optimal comfort for the occu- has been strongly heated through the effect of direct sunlight in order to allow the...
  • Page 88 Heating and air conditioning system  Using the cooling economically  page 86. Recommended setting for all periods of the year:   Set the desired temperature, we recommend 22°C (72°F). Operational problems  page 86.   fig. Press the button AUTO ...
  • Page 89 Heating and air conditioning system De-mist or de-ice the windscreen The temperature control is controlled automatically. More air flows out of the air outlet vents 1 and 2. Air flow to the windows Air flow to head Setting temperature Air flow in the footwell Recirculated air mode –...
  • Page 90: Starting-Off And Driving

    Starting-off and Driving Starting-off and Driving Setting steering wheel position WARNING (continued)  If you adjust the steering wheel further towards the head, you will reduce the protection offered by the driver airbag in the event of an accident. Check that the steering wheel is aligned to the chest.
  • Page 91: Starting The Engine

    Starting-off and Driving  Starting the engine You should not switch on any major electrical components during the heating period otherwise the vehicle battery will be drained unnecessarily. General - start engine You can only start the engine only using an original ignition key. Applies to all models: ...
  • Page 92: Switching Off The Engine

    Starting-off and Driving   Avoid high engine revolutions, full throttle and high engine loads as long as the You should start the engine immediately after the glow plug warning light  engine has not yet reached its normal operating temperature - risk of damaging the gone out.
  • Page 93: Shifting (Manual Gearbox)

    Starting-off and Driving Note Note   The radiator fan may continue running for a further 10 minutes or so after the One should not lay the hand on the shift lever while driving the vehicle. The pres- engine and the ignition have been switched off. The coolant fan may, however, also sure of the hand will be transferred to the gearshift forks in the gearbox.
  • Page 94: Parking Aid

    Starting-off and Driving The handbrake warning is activated if you drive at a speed of more than 6 km/h for Range of sensors more than 3 seconds. The clearance warning begins at a distance of about 160 cm from the obstacle (area ...
  • Page 95: Cruise Control System (Ccs)

    Starting-off and Driving  your vehicle. It is possible that the audible warning does not function correctly (an The cruise control system is not able to maintain a constant speed when driving on obstacle behind the vehicle may not be detected - take extra care). Have the fault recti- steep downhill sections.
  • Page 96: Start-Stop

    Starting-off and Driving The set speed remains stored in the memory. WARNING The Resumption of the stored speed is achieved by releasing the brake or clutch First ensure that it is not too high for the traffic conditions which exist at that pedal, on vehicles fitted with automatic gearbox only after releasing the brake pedal moment before resuming the stored speed.
  • Page 97 Starting-off and Driving Automatic engine shut down (stop phase) Engine speed is lower than 1200 rpm – Bring the vehicle to a stop (apply the handbrake, if necessary). The temperature inside the vehicle battery is not too low or too high –...
  • Page 98 Starting-off and Driving Messages in the instrument cluster (valid for vehicles without information may take several hours until the temperature inside the battery reaches the appro- display*) priate temperature for the START-STOP system.  In some cases, it is necessary to manually start the engine using the key (for ERROR START STOP Error in the example, if the driver's seat belt is not fastened or if the driver door is open for a period...
  • Page 99: Automatic Gearbox

    Automatic gearbox Automatic gearbox Automatic gearbox* It is sufficient to engage selector lever position P when parking on a flat surface. When parking on a slope you should first apply the handbrake firmly and then move the selector lever into position P. This is to ensure that there is no excessive pressure acting Information for driving with the 6-speed automatic gearbox* on the lock mechanism and that it is easier to subsequently move the selector lever out Your car is equipped with a conventional 6-speed automatic gearbox.
  • Page 100 Automatic gearbox – Press the Shiftlock button (button in handle of the selector lever), move the WARNING (continued) selector lever into the desired position, e.g. in D, and then release the Shiftlock  button. If you are stopping at a hill (downhill section), never try to hold the car stationary with the gear engaged by means of the “accelerator”, this means by –...
  • Page 101 Automatic gearbox the right. In the positions D and S the gear you have already engaged will be addition- - Position for sporty style of driving ally displayed on the display. Shifting up later into a higher gear makes it possible to fully exploit the power potential of the engine.
  • Page 102: Kickdown Function

    Automatic gearbox Dynamic shift programme A time delay element ensures that the selector lever is not blocked when rapidly switching over the position N (e.g. from R to D). This does, for example, allow one to seesaw out a stuck vehicle. The selector lever lock will click into place if the lever is in The automatic gearbox of your vehicle is controlled electronically.
  • Page 103 Automatic gearbox Tiptronic Manual shifting on the multifunction steering wheel* The Tiptronic allows the driver to also shift gears manually. Fig. 102 Multifunction steering wheel: manual shifting Switching over to manual shifting Fig. 101 Selector lever: manual shifting / large information display: manual shifting –...
  • Page 104 Automatic gearbox Tow-starting and towing vehicle A functional fault can have the following effect:  The gearbox only shifts into certain gears. Tow-starting a vehicle  The reverse gear R cannot be used. It is not possible to tow-start or push-start vehicles fitted with automatic gearbox. ...
  • Page 105: Communication

    Communication Communication Multifunction steering wheel* Operate radio und navigation on the multifunction steering wheel The buttons for setting the basic functions of the factory-fitted radio and navigation  fig. system are located on the multifunction steering wheel* 104. You can of course operate the radio and navigation at the appliance. You will find a description in the operating instructions of your radio.
  • Page 106: Universal Telephone Preinstallation Gsm Ii

    Communication On vehicles which are equipped with the universal telephone preinstallation GSM II, pressing the button only allows to operate the telephone.  The buttons apply for the respective operating mode of the current radio or navigation external aerial incorrectly installed, ...
  • Page 107 – Confirm the PIN (as standard 1234).  Please refer to the following guidelines  page 105. – If the hands-free system announces (as standard Skoda UHV) on the display of the  Should you have any questions, please contact an authorised Škoda Service mobile phone, enter the PIN (as standard 1234) within 30 seconds and wait until Partner.
  • Page 108 Communication Connection with an already paired mobile phone devices and mutual interferences with other devices. If your mobile phone is e.g. in a ® jacket pocket, this can lead to difficulties when establishing the Bluetooth connection After switching on the ignition, the connection is automatically established for the with the hands-free system or the data transfer.
  • Page 109 Communication Operating telephone calls with the aid of the adapter*.  The voice control of the telephone is activated by briefly pressing the PTT button  fig. (push to talk) on the adapter* 106. Aside from the PTT button, the SOS button can be found on certain adapters* on the ...
  • Page 110 Phone name - the possibility to change the name of the telephone unit (pre-set  Back  SKODA UHV) Phone book Settings In the menu point Phone book is the list of the loaded contacts from the telephone In the menu Settings you can select the following menu points: memory and the SIM card of the mobile phone.
  • Page 111: Voice Control

    Communication Voice control Voice commands The voice control is possible in the following languages: Dialogue Czech, English, German, French, Italian, Spanish, Russian and Portuguese. The period, in which the telephone system is ready to receive voice commands and Voice commands for operating the telephone control unit carry out the voice commands, is called DIALOGUE.
  • Page 112: Music Playback Via Bluetooth

    Communication – Give the command CALL XZY after the signal tone. Note  The loudspeakers in the vehicle are matched to a power output of the radio and Example for calling the name from the phone book navigation system of 4x 20 W. Voice command Announcement ...
  • Page 113 Communication...
  • Page 114: Safety

    Passive Safety Safety Passive Safety  Basic information seat belt height adjusters for front seats;  front airbags for the driver and the front passenger*;  Driving the safe way side airbags*;  head airbags*; Passive safety measures reduce the risk of injury in accident situations. ...
  • Page 115: Correct Seated Position

    Passive Safety  Correct seated position Ensure that all the windows offer a good visibility to the outside.  Safely attach the items of luggage  page 63, “Loading the luggage compartment”.  Correct seated position for the driver Ensure that no objects can obstruct the pedal. ...
  • Page 116 Passive Safety WARNING (continued) WARNING  correctly fastened in order to provide an optimal protection for you and your The front seats and the head restraints must always be adjusted to match occupants. the body size of the seat occupant as well as the seat belts must always be ...
  • Page 117 Passive Safety  lean out of the window; WARNING (continued)  put the feet out of the window;   Always keep your feet in the footwell when the car is being driven - never put the feet on the dash panel; put your feet out of the window or on the surfaces of the seats.
  • Page 118: Seat Belts

    Seat belts Seat belts Why seat belts? WARNING (continued)  Expectant women must also always wear a seat belt. This is the only way of ensuring optimal protection for the unborn child  page 119, “Fastening three-point seat belts”.  It is important for the belt webbing to be properly routed if the seat belts are to offer the maximum protection.
  • Page 119: Important Safety Information Regarding The Use Of Seat Belts

    Seat belts The speed of the vehicle is, nevertheless, the most important factor. Doubling the WARNING (continued) speed of the vehicle from 25 km/h up to 50 km/hour increases the kinetic energy four  times. The belt webbing must not run across solid or fragile objects (e.g. specta- cles, ball-point pens, keys etc.) as this may be a cause of injuries.
  • Page 120: How Are Seat Belts Correctly Fastened

    Seat belts How are seat belts correctly fastened? WARNING (continued) chest. The lap part of the belt must run across the hip and must never be routed Fastening three-point seat belts  fig. 111 across the stomach. It must always fit snugly - left.
  • Page 121: Belt Tensioner

    Seat belts Three-point safety belt for the middle rear seat – Then pull firmly on the belt to ensure that the seat belt height adjuster has correctly locked in place. It is used in the same way as the normal three-point seat belts on the left and right (at front and rear).
  • Page 122 Seat belts WARNING (continued)  The protective function of the system is only adequate for a single accident. If the belt tensioners have been deployed, it is then necessary to replace the entire system.  The Owner's Manual must also be handed over to the new owner if the vehicle is sold.
  • Page 123: Airbag System

    Airbag system Airbag system  Description of the airbag system an airbag indicator light showing a switched-off front passenger airbag* in the middle of the dash panel flashes. General information on the airbag system WARNING The front airbag system is complementary to the three-point seat belts and offers addi- ...
  • Page 124: Front Airbags

    Airbag system  When are the airbags deployed? In the event of an accident in which the airbags are deployed:  the interior lighting comes on (if the switch for the interior light is in the door The airbag system is designed in such a way that the driver and the front passenger contact position), airbag* are deployed in the event of a frontal collision of major severity.
  • Page 125 Airbag system Apart from their normal protective function, a further task of the seat belts is to also ioned when they make contact with the fully inflated airbag and the risk of injury to hold the driver and front passenger in a correct seated position in the event of a frontal head and chest is thus reduced.
  • Page 126: Side Airbags

    Airbag system Side airbags* WARNING (continued)  It is essential to always switch off  page 128, “Deactivating airbags” the Description of side airbags front passenger airbag when attaching a child safety seat on the front The side airbag increases protection of the passenger concerned in the passenger seat where the child is seated with its back facing in direction of case of a side impact.
  • Page 127 Airbag system Function of the side airbags WARNING (continued) Risk of injury to the upper part of the body is reduced by fully inflated passenger seat where the child is seated with its back facing in direction of side airbags. travel (in some countries also when the child is facing the direction of travel).
  • Page 128: Head Airbags

    Airbag system Together with other elements (such as cross bars in the doors, stable vehicle structure) WARNING (continued) the head airbags are the consequent further development of occupant protection in  the case of side collisions. Any work on the side airbag system including removing and installing system components because of other repair work (e.g.
  • Page 129: Deactivating Airbags

    Airbag system Deactivating airbags Important safety information on the head airbag Correct use of the airbag system considerably reduces the risk of injury! Deactivating airbags If any airbags have been deactivated, switch them on again as soon as WARNING possible so that they are able to again provide their proper protection. ...
  • Page 130 Airbag system    switching off the airbag is indicated by the lighting up of the indicator light in the – Check whether the airbag indicator light in the display       fig. 121 display ...
  • Page 131: Transporting Children Safely

    Transporting children safely Transporting children safely What you should know about transporting children! Note National legal provisions, which deviate from the information contained in these oper- An introduction to the subject ating instructions, take precedence over the information contained in the operating instructions.
  • Page 132 Transporting children safely on the front passenger seat then you must pay attention to the following warnings in WARNING (continued) connection with the use of the airbag system on the front passenger seat. is moving. This particularly applies to children who are transported on the front passenger seat if the airbag system deploys in the event of an accident.
  • Page 133: Child Seat

    Transporting children safely Child safety and side airbag* WARNING (continued) Children must never be seated in the deployment area of the side deployed. When transporting a child on the front passenger seat, please airbags and head airbags. comply with the appropriate national regulations regarding the use of child safety seats.
  • Page 134 Transporting children safely Children who are more than 1.50 m in height or who weigh more than 36 kg can use Child seats in which the child is facing with its back towards the direction of travel the normal seat belts without a seat bolster. should not be used on the front passenger seat when the vehicle is fitted with a front passenger airbag ...
  • Page 135 Transporting children safely Child seats in which the child is facing with its back towards the direction of travel WARNING should not be used on the front passenger seat when the vehicle is fitted with a  front passenger airbag  page 131, “Use of child safety seats on the front passenger When transporting a child on the front passenger seat, please comply with seat”.
  • Page 136: Attaching A Child Seat Using The "Isofix" System

    Transporting children safely One can mount a child safety seat using the “ISOFIX” system quickly, easily and reliably. WARNING (continued) Please pay close attention to instructions from the manufacturer of the child safety Switch off the front passenger airbag if necessary at a specialist garage or seat when installing and removing the seat.
  • Page 137: Attaching Child Seat Using The "Top Tether" System

    Transporting children safely Attaching child seat using the “Top Tether” system Fig. 129 Rear seat: Top Tether IIn certain countries national legal provisions also require the equipment of the rear  fig. seat with fixing eyes for child seat using the “Top Tether” system 129.
  • Page 138: Driving Tips

    Intelligent Technology Driving Tips Intelligent Technology Electronic stability programme (ESP)* while occurs this is on the inner rear wheel of a vehicle which tends to understeer (tendency to shift out of the curve). This braking control cycle is accompanied by noises.
  • Page 139 Intelligent Technology  Changes to vehicle (e.g. on engine, on the brakes, on chassis or another combina- Switching off tion of tyres and wheels) can influence the function of the ESP  page 184, “Accesso-  fig. You can switch the TCS off and on again as you wish by pressing the button 130.
  • Page 140: Brakes

    Intelligent Technology Brakes General The EDL makes it much easier, and sometimes at all possible, to start off, accelerate What has a negative effect on braking efficiency? and climb a steep hill when the conditions of the road surface are unfavourable. Wear-and-tear Operating principle Wear-and-tear to the brake pads is greatly dependent on the operating conditions of...
  • Page 141: Brake Booster

    Intelligent Technology Brake booster Low brake fluid level An insufficient level of brake fluid may result in problems in the brake system. The level of the brake fluid is monitored electronically  page 32, “Brake system ”. The brake booster boosts the pressure which you generate with the brake pedal. The necessary pressure is only generated when the engine is running.
  • Page 142: Brake Assist

    Intelligent Technology The Brake Assist is able to help you achieve a shorter braking distance in emergency WARNING situations by rapidly producing the pressure required in the brake system. It fully  exploits the attributes of the ABS. After you release the brake pedal, the function of the The ABS can also not overcome the physical limits of your vehicle.
  • Page 143: Tyre Pressure Monitoring System

    Intelligent Technology Tyre pressure monitoring system* You will place great stresses on the power steering system if the steering is turned to full lock when the vehicle is stationary. Turning the steering to full lock in such a situa- tion will be accompanied by noises. It is still possible to fully steer the vehicle if the power steering fails or if the engine is not running (vehicle being towed in).
  • Page 144: Diesel Particle Filter* (Diesel Engine)

    Intelligent Technology   If the warning light  does not go out after the basic setting, there is a fault in the cannot warn in case of very rapid tyre inflation pressure loss, e.g. in case of sudden system. Have the vehicle inspected by your nearest specialist garage. tyre damage.
  • Page 145 Intelligent Technology WARNING (continued) When the engine reaches its operating temperature, these substances might ignite - risk of fire! Note  When using diesel fuel with high sulphur content the life of the diesel particle filter is clearly reduced. A specialist garage will be able to tell you which countries use only diesel fuel with high sulphur content.
  • Page 146: Driving And The Environment

    Driving and the Environment Driving and the Environment The first 1 500 kilometres and then afterwards Caution All the speed and engine revolution figures apply only when the engine is at its normal A new engine operating temperature. Never rev up an engine which is cold, neither when the vehicle is stationary nor when driving in individual gears.
  • Page 147: Catalytic Converter

    Driving and the Environment  Catalytic converter If you detect misfiring, a drop in performance or irregular engine running when driving, reduce your speed immediately and have the vehicle inspected by the nearest Proper operation of the emission control system (catalytic converter) is specialist garage.
  • Page 148 Driving and the Environment  fig. 133 guidelines given in this chapter in order to make best use of these characteristics and shows the ratio of fuel consumption to the speed of your vehicle in the to maintain their effectiveness. relevant gear.
  • Page 149 Driving and the Environment  Reducing idling Check the ground below your vehicle at regular intervals to detect any leakages in good time. Please have your vehicle inspected by a specialist garge if you find any Idling also costs fuel. stains caused by oil or other fluids on the floor.
  • Page 150: Environmental Compatibility

    Driving and the Environment Checking tyre inflation pressures Keeping a log of your fuel consumption Tyres which are correctly inflated save fuel. If you really wish to keep a close check on your fuel consumption, it is best to enter the figures in a logbook.
  • Page 151: Motoring Abroad

    Driving and the Environment  Unleaded petrol Solvent-free protection of the vehicle for transportation from the production plant to the customer.  A vehicle fitted with a petrol engine must always be refuelled with unleaded petrol The use of solvent-free adhesives. ...
  • Page 152: Driving Through Bodies Of Water On Roads

    Driving and the Environment Driving through bodies of water on roads Caution  When driving through bodies of water, parts of the vehicle such as the engine, gearbox, catalytic converter, chassis or electrics can be severely damaged.  Oncoming vehicles can generate water waves which can exceed the permissible water level for your vehicle.
  • Page 153: Towing A Trailer

    Towing a trailer Towing a trailer Towing a trailer You can negotiate appropriately steeper inclines and descents if you do not make full use of the permissible trailer load. Technical requirements The trailer loads specified only apply for altitudes up to 1 000 metres above mean sea level.
  • Page 154 Towing a trailer Detachable ball head You must always reduce your speed immediately as soon as you detect even just the slightest swaying of the trailer. On no account attempt to stop the trailer from The ball rod is detachable on vehicles with towing device and suppliable from Škoda “swaying”...
  • Page 155 Towing a trailer...
  • Page 156: General Maintenance

    Taking care of your vehicle and cleaning the vehicle General Maintenance Taking care of your vehicle and cleaning the vehicle  General Frequency of use;  The parking situation (garage, below trees etc.); Proper care retains the value of your vehicle. ...
  • Page 157 Taking care of your vehicle and cleaning the vehicle  There are no particular points to note before washing your vehicle in an automatic Do not use any insect sponges, rough kitchen sponges or similar cleaning products vehicle wash system other than the usual precautionary measures (closing the - risk of damage to the surface of paintwork.
  • Page 158 Taking care of your vehicle and cleaning the vehicle Paint damage A new layer of a high-quality hard wax polish can be applied to the clean bodywork after it has dried thoroughly. Even if you use a wax preserver regularly we still recom- mend that you treat the paintwork of the vehicle at least twice a year with hard wax.
  • Page 159 Taking care of your vehicle and cleaning the vehicle Do not affix any stickers over the inside of the rear window to avoid damage to the Note heating elements of the rear window heater. When washing your vehicle, ensure that as little water as possible gets into the locking We recommend using a preservative from Škoda genuine accessories offered by your cylinders.
  • Page 160: Care Of The Interior Of Vehicle

    Taking care of your vehicle and cleaning the vehicle Underbody protection Engine compartment The underside of your vehicle is protected for life against chemical and mechanical Good corrosion protection is very important, particularly in winter when one often influences. drives over its salt-strewn roads. One should therefore clean the entire engine compartment before and after the salt spreading period, in order to prevent the salt One cannot, however, completely rule out damage to the protective layer when from being destructive.
  • Page 161 Taking care of your vehicle and cleaning the vehicle Removing stains Upholstery cloth and cloth trim on the doors, luggage compartment cover, headliner etc. are best treated with special cleaning products, using if necessary a dry foam and – Remove fresh stains which are water-based (e.g. coffee, tea, juices, blood etc.) a soft sponge or brush.
  • Page 162 Taking care of your vehicle and cleaning the vehicle Note  Use a care cream with light blocker and impregnation effect regularly and each time after cleaning the leather. The cream nourishes the leather, allows it to breathe and keeps it supple and also provides moisture. It also creates surface protection. ...
  • Page 163: Fuel

    Fuel Fuel Petrol On vehicles with prescribed unleaded petrol 95/91 RON, the use of petrol with a higher octane number than 95 does not result in a noticeable power increase or a lower fuel consumption. Grades of petrol On vehicles with prescribed unleaded petrol min. 95 RON, the use of petrol with a higher octane number than 95 does not result in a power increase or a lower fuel consumption.
  • Page 164: Refuelling

    Fuel Caution Caution  Therefore, your vehicle can only be operated with diesel fuel which complies with It is not permitted to add the various fuel additives on the market, including petrol, to the standard EN 590 (standard DIN 51628 in Germany, standard ÖNORM C 1590 in diesel fuel in order to improve its flow properties.
  • Page 165 Fuel WARNING Pay attention to any legal requirements if you do carry a spare canister in the vehicle. We do not recommend carrying any fuel canisters in your vehicle for safety reasons. The canister can be damaged in the event of an accident and fuel may leak out.
  • Page 166: Inspecting And Replenishing

    Inspecting and replenishing Inspecting and replenishing Engine compartment Opening the bonnet  fig. – Unlock the bonnet 138. Bonnet remote release – Ensure that the arms of the windscreen wipers are correctly in place against the windscreen before opening the bonnet otherwise damage could occur to the paintwork.
  • Page 167 Inspecting and replenishing Working in the engine compartment WARNING (continued) Particular care is required when carrying out any work in the engine  Do not let objects, such as e.g cleaning cloth or tools lie in the engine compartment! compartment. ...
  • Page 168: Engine Oil

    Inspecting and replenishing Engine oil Overview of the engine compartment The main inspection points. Check engine oil level The dipstick indicates the level of oil in the engine. Fig. 141 Dipstick Fig. 140 Diesel engine 1.6 ltr./77 kW Checking the oil level –...
  • Page 169 Inspecting and replenishing It is normal for the engine to consume oil. The oil consumption may be as much as 0.5 – Wipe off the oil from the sealing surface of the cover and on the counterpart using l/1 000 km depending on your style of driving and the conditions under which you a clean cloth.
  • Page 170: Cooling System

    Inspecting and replenishing Coolant Caution The cooling system is factory-filled with coolant (purple in colour), which complies You must not pour any additives into the engine oil - risk of engine damage! Damage, with the specification TL-VW 774 G. which results from such product, are excluded from the warranty. We recommend that you use the coolant additive G13 (purple in colour) for topping up the system.
  • Page 171 Inspecting and replenishing  Any faults or problems resulting from corrosion may cause a loss of coolant WARNING and, as a consequence of this, result in major engine damage. Read and observe the warning notes  page 166, “Working in the engine compartment”...
  • Page 172: Brake Fluid

    Inspecting and replenishing WARNING WARNING  The cooling system is pressurized! Do not open the cap of the coolant You must therefore be aware when working in the engine compartment that the expansion bottle if the engine is still hot - risk of scalding! fan may switch on suddenly - risk of injury! ...
  • Page 173: Battery

    Inspecting and replenishing For the sake of the environment WARNING  In view of the problems involved with proper disposal of brake fluid, the special tools Read and observe the warning notes  page 166, “Working in the engine and the professional knowledge required, we recommend you have the brake fluid compartment”...
  • Page 174 Inspecting and replenishing WARNING (continued) WARNING   The battery acid is strongly corrosive and must, therefore, be handled with Never use a battery which is damaged - risk of explosion! Immediately the greatest of care. Always wear protective gloves, eye and skin protection replace a damaged battery.
  • Page 175 Inspecting and replenishing Battery with a two-tone indicator Note  Batteries with two-tone indicator, which are mounted as of factory, are marked with a code which always begins with 5K0. The exact marking can be e.g. 5K0 915 105 D. ...
  • Page 176 Inspecting and replenishing – Only for “quick-charging”: Disconnect both battery cables (first of all “negative”, Note then “positive”).  Batteries with three-tone indicator, which are mounted as of factory, are marked – Carefully attach the terminal clamps of the charger to the battery terminals (red = with a code which always begins with 1J0, 7N0 or 3B0.
  • Page 177: Windshield Washer System

    Inspecting and replenishing Windshield washer system Caution On vehicles with the “START/STOP” system, the pole terminal of the charger must not be connected directly to the negative terminal of the vehicle battery, but only to the  page 192, fig. engine earth 158.
  • Page 178 Inspecting and replenishing Caution  On no account should you add radiator antifreeze or other additives to the wind- screen washer fluid.  If the vehicle is fitted with a headlight cleaning system, you should only add cleaning products which do not attack the polycarbonate coating of the headlights to the windscreen washer fluid.
  • Page 179: Wheels And Tyres

    Wheels and Tyres Wheels and Tyres Wheels WARNING  New tyres during the first 500 km do not offer optimal grip and should General information therefore be run appropriately - risk of accident!   New tyres do not offer optimal grip at first and should therefore be run in for about Never drive with damaged tyres - risk of accident! 500 km at a moderate speed and an appropriately cautious style of driving.
  • Page 180 If the inflation pressure is too low, the tyre must perform a higher rolling and are fitted on models Fabia Combi Scout, have the following inflation pressure resistance. At higher speeds the tyre will warm up as a result of this. This can values in kPa.
  • Page 181 Wheels and Tyres  fig. 148. Markings on the walls of the tyres through the letters “TWI”, triangular The specialist garages have access to the most current information about which tyres symbols or other symbols identify the position of the wear indicators. we have released for use on your vehicle.
  • Page 182 Wheels and Tyres Speed symbol Permissible maximum speed For the sake of the environment Old tyres must be disposed of in conformity with the appropriate regulations. 210 km/h 240 km/h Note 270 km/h It is not normally possible to fit wheels from other models of cars for technical reasons. This may also apply in certain circumstances to the wheels of the same type of The date of manufacture is also stated on the tyre wall (possibly only on the inside of vehicle.
  • Page 183: Unidirectional Tyres

    Wheels and Tyres Winter tyres For the sake of the environment Fit your summer tyres on again in good time since summer tyres offer you better grip The handling of your vehicle will be significantly improved when driving on wintry and handling on roads which are free of snow and ice as well as ar temperatures below roads if you fit winter tyres.
  • Page 184 Wheels and Tyres Wheel size Depth (D) Tyre size 5J x 14 35 mm 165/70 6J x 14 37 mm 185/60 6J x 15 43 mm 185/55 Only fit snow chains with links and locks not larger than 12 mm. Remove the full wheel trims before installing the snow chains.
  • Page 185: Accessories, Changes And Replacement Of Parts

    Vehicles of category N1 Any damage which is done caused by technical changes made without consulting a Skoda dealer is excluded from the guarantee. The vehicle of category N1 is a vehicle which is designed and manufactured for trans- porting loads with a maximum weight of 3.5 tonnes.
  • Page 186: Breakdown Assistance

    Breakdown assistance Breakdown assistance Breakdown assistance First-aid box* and Warning triangle* Please read carefully the instructions which are attached to the fire extinguisher. The fire extinguisher must be checked by an authorised person or company annually (please observe the various differing national legal requirements). WARNING If the fire extinguisher is not correctly attached, in case of sudden manoeuvres or an accident it can be “thrown”...
  • Page 187: Tyre Repair Kit

    Breakdown assistance Spare wheel* The vehicle tool kit and the lifting jack* are housed in a plastic box in the spare wheel*  page 185, fig. 150 or in the space for the spare wheel. There is also space here for The spare wheel is stowed in the spare wheel well in the luggage the removable ball for the trailer towing device.
  • Page 188: Changing A Wheel

    Breakdown assistance Changing a wheel Changing a wheel Always change a wheel on a level surface as far as possible. Preliminary work – Take off the full wheel trim*  page 188 or the caps  page 188. The following steps should be carried out before actually changing the wheel. –...
  • Page 189 Breakdown assistance Installing – Change the damaged wheel or consult a specialist garage about possibilities for getting repairs done. – First press the full wheel trim onto the wheel at the valve opening provided. Then press the full wheel trim into the wheel in such a way that its entire circumference WARNING locks correctly in place.
  • Page 190 Breakdown assistance Slackening and tightening wheel bolts Raise vehicle Slacken the wheel bolts before jacking up the vehicle. You have to raise the vehicle with a lifting jack in order to be able to take off the wheel. Fig. 154 Changing a wheel: Slackening wheel bolts Fig.
  • Page 191: Jump-Starting

    Breakdown assistance – Have the tightening torque checked with a torque wrench as soon as possible. WARNING (continued) Steel and light alloy wheels must be tightened to a tightening torque of 120 Nm.  Not positioning the lifting jack at the specified points can result in damage The safety wheel bolts on vehicles fitted with them (one safety wheel bolt per wheel) to the vehicle.
  • Page 192 Breakdown assistance Start engine Jump-start cables Only use jump-start cables which have an adequately large cross-section and insu- lated terminal clamps. Please pay attention to the manufacturer's instructions. Positive cable - colour coding in the majority of cases red. Negative cable - colour coding in the majority of cases black. WARNING Fig.
  • Page 193: Tow-Starting And Towing Vehicle

    Breakdown assistance Tow-starting and towing vehicle WARNING  The non-insulated parts of the terminal clamps must never make contact General with each other. Furthermore, the cable connected to the positive terminal of the battery must not come into contact with electrically conducting parts of the Please pay attention to the following instructions if you are going to use a tow rope: vehicle - risk of a short circuit! ...
  • Page 194 Breakdown assistance  fig. 159 One should be constantly vigilant not to allow impermissibly high towing forces or – Screw in the towing eye by hand to the left up to the stop - right and jerky loadings. There is always a risk of excessive stresses and damage resulting at the tighten it as much as possible.
  • Page 195 Breakdown assistance – Switch on the ignition. Caution – Wait until both vehicles are moving then release the clutch pedal slowly. If the vehicle is towed in by a recovery vehicle, it should only be towed in with the front wheels raised.
  • Page 196: Fuses And Light Bulbs

    Fuses and light bulbs Fuses and light bulbs Electric fuses Colour coding of fuses Colour Maximum amperage Replacing fuses in the dash panel light brown Defect fuses must be replaced. brown blue yellow white green Fig. 161 Bottom side of the dash panel: Fuse cover Caution ...
  • Page 197 Fuses and light bulbs Fuse assignment in the dash panel Power consumer Amperes Control unit for trailer detection Control unit for automatic gearbox Motor for halogen projector headlights with cornering light function Navigation PDA Electrohydraulic power steering START - STOP - radio Daylight driving lights Fig.
  • Page 198 Fuses and light bulbs Power consumer Amperes Power consumer Amperes Fuel pump START-STOP - DC/DC converter infotainment Ignition Radio Cruise control system, operation of PTC relay Electrical power window (front and rear) - left side Lambda probe Electrical power window (front and rear) - right side High pressure pump, pressure valve Parking light - left side Engine control unit...
  • Page 199 Fuses and light bulbs – Press together the interlocks of the fuse cover simultaneously in direction of arrow No. Power consumer Amperes  page 197, fig. 163 and push out the cover in direction of arrow Dynamo – Release the fixtures in the openings using a flat screwdriver and fold the cover upwards in direction of arrow Not assigned...
  • Page 200 Fuses and light bulbs Replace fuses at the battery (automatic gearbox) Fuse assignment at the battery (automatic gearbox) Fig. 166 Schematic representation of fuse assignment at battery Fig. 165 The battery: Open the positive terminal cover / fuse cover Certain electrical components are only standard on certain vehicle model versions or ...
  • Page 201: Bulbs

    Fuses and light bulbs Caution Front headlight Halogen headlight Halogen projector headlights Observe the following guidelines  in “Replace fuses at the battery (automatic gearbox)”. Low beam light Main beam light Bulbs Parking lights W5W, LED Turn signals PY21W Replacing bulbs Fog lights* H8/HB4 The relevant lamp must always be switched off before a light bulb is replaced.
  • Page 202 – We recommend that you have the headlight setting checked by a Skoda Service Partner after replacing the light bulb. Fig. 167 Fitting position of the bulbs: Halogen headlights / halogen projector headlights Low beam (halogen projector headlights) ...
  • Page 203 – Insert the protective cap. – Replace the defective light bulb. – We recommend that you have the headlight setting checked by a Skoda Service – Insert the lamp holder with light bulb into the headlight. Secure the lamp holder by Partner after replacing the light bulb.
  • Page 204 – First of all put the grille with the latch in place on the side opposite the marking. – Press into place the protective grille onto the side facing the marking. Cover of fog lights - Fabia Scout, Fabia RS Fig. 173 Front bumper: Fog lights / changing the bulb Removing the fog light ...
  • Page 205 Fuses and light bulbs – Connect the plug to the socket – Open the boot lid. – Screw in the screws again and insert the cover. The cover must engage firmly. – Hold tight the rear light unit with one hand and unscrew the plastic nut with the ...
  • Page 206 Fuses and light bulbs – To replace a light bulb, turn the bulb connector of the light bulb to the left (in the direction of the arrows on the housing) and take it out of the housing. – Replace the light bulb, put the bulb connector back into the housing and turn it to the right up to the stop (in the opposite direction of the arrows on the housing).
  • Page 207 Fuses and light bulbs...
  • Page 208: Technical Data

    Technical Data Technical Data Technical Data General information Performances The details given in the official vehicle registration documents always take precedence The listed performance values were determined without performance-reducing over the details in the Owner's Manual. Please refer to the official vehicle registration equipment, e.g.
  • Page 209: Fuel Consumption According To The Ece Standards And Eu Guidelines

    Technical Data Gearbox code, paint number, interior equipment number, engine output, engine Non-urban traffic code For the consumption measurement in non-urban traffic the vehicle, as in daily Partial description of the vehicle motoring, is accelerated and braked several times in all gears. The vehicle speed changes within the range from 0 to 120 km/h.
  • Page 210: Dimensions

    Technical Data Dimensions Dimensions (mm) FABIA FABIA SCOUT FABIA RS COMBI COMBI GreenLine COMBI SCOUT COMBI RS Length 4000 4032 4029 4247 4247 4275 4276 Width 1642 1658 1642 1642 1642 1658 1642 Width including exterior mirror 1886 1886 1886...
  • Page 211: Engine Oil Specifications

    Technical Data Engine oil specifications Diesel engines Specification Content The grade of engine oil should be selected in accordance with precise 1.2 ltr./55 kW TDI CR DPF - EU5 VW 507 00 specifications. 1.6 ltr./55 kW TDI CR DPF - EU5 VW 507 00 The engine of your vehicle has been factory-filled with a high-grade oil which you can 1.6 ltr./66 kW TDI CR DPF - EU5...
  • Page 212 Technical Data Caution Only the above-mentioned oils may be used on vehicles with flexible service intervals (QG1). We recommend always refilling with oil of the same specification since this will maintain the properties of the oil. In exceptional cases, you must top up only once engine oil complying with Specification VW 502 00 (only for petrol engines) or Specifi- cation VW 505 01 (only for diesel engines) to maximum 0.5 litres.
  • Page 213: Ltr./44 Kw - Eu 5

    Power output kW per rpm 44/5200 Maximum torque Nm per rpm 108/3000 3/1198 Number of cylinders/Displacement (cm Performances FABIA COMBI Maximum speed km/h Acceleration 0 - 100 km/h 16,5 16,7 Fuel consumption (in ltr./100 km) and CO emission (in g/km)
  • Page 214 Technical Data Weight (in kg) FABIA COMBI 1545 1565 Permissible gross weight 1515 1520 Unloaden weight ready for work 1090 1110 Loading capacity Loading capacity when using the TLC Permissible front axle load Permissible rear axle load (800/500) (800/450) Permissible trailer load, trailer braked/unbraked...
  • Page 215: 1.2 Ltr./51 Kw - Eu 5/Eu 2 Ddk

    Power output kW per rpm 51/5400 Maximum torque Nm per rpm 112/3000 3/1198 Number of cylinders/Displacement (cm Performances FABIA COMBI Maximum speed km/h Acceleration 0 - 100 km/h 14,9 15,0 Fuel consumption (in ltr./100 km) and CO emission (in g/km)
  • Page 216 Technical Data Weight (in kg) FABIA COMBI 1550 1570 Permissible gross weight 1520 1525 Unloaden weight ready for work 1095 1115 Loading capacity Loading capacity when using the TLC table on page 215 Permissible front axle load Permissible rear axle load...
  • Page 217: Ltr./63 Kw Tsi - Eu 5

    63/4800 Maximum torque Nm per rpm 160/1500 - 3500 4/1197 Number of cylinders/Displacement (cm Performances FABIA COMBI Maximum speed km/h Acceleration 0 - 100 km/h 11,7 11,8 Fuel consumption (in ltr./100 km) and CO emission (in g/km)
  • Page 218 Technical Data Weight (in kg) FABIA COMBI 1571 1591 Permissible gross weight 1541 1546 Unloaden weight ready for work 1116 1136 Loading capacity Loading capacity when using the TLC Permissible front axle load Permissible rear axle load (1000/500) (1000/450) Permissible trailer load, trailer braked/unbraked...
  • Page 219: Ltr./77 Kw Tsi - Eu 5

    Power output kW per rpm 77/5000 Maximum torque Nm per rpm 175/1550 - 4100 4/1197 Number of cylinders/Displacement (cm Performances FABIA COMBI Maximum speed km/h Acceleration 0 - 100 km/h 10,1 10,2 10,2 10,3 Fuel consumption (in ltr./100 km) and CO...
  • Page 220 Technical Data Weight (in kg) FABIA COMBI 1585 1619 1605 1639 Permissible gross weight 1555 1589 1560 1594 Unloaden weight ready for work 1130 1164 1150 1184 Loading capacity Loading capacity when using the TLC Permissible front axle load Permissible rear axle load...
  • Page 221: Ltr./63 Kw - Eu 5

    Power output kW per rpm 63/5000 Maximum torque Nm per rpm 132/3800 4/1390 Number of cylinders/Displacement (cm Performances FABIA COMBI Maximum speed km/h Acceleration 0 - 100 km/h 12,2 12,3 Fuel consumption (in ltr./100 km) and CO emission (in g/km)
  • Page 222 Technical Data Weight (in kg) FABIA COMBI 1559 1579 Permissible gross weight 1529 1534 Unloaden weight ready for work 1104 1124 Loading capacity Loading capacity when using the TLC Permissible front axle load Permissible rear axle load (1000/500) (1000/450) Permissible trailer load, trailer braked/unbraked...
  • Page 223: 1,6 L/77 Kw - Eu 4, Eu 2 Ddk

    Engine Power output kW per rpm 77/5600 Maximum torque Nm per rpm 153/3800 4/1598 Number of cylinders/Displacement (cm Performances FABIA COMBI Maximum speed km/h Acceleration 0 - 100 km/h 10,4 11,5 10,5 11,6 Fuel consumption (in ltr./100 km) and CO...
  • Page 224 Technical Data Weight (in kg) FABIA COMBI 1569 1614 1589 1634 Permissible gross weight 1539 1584 1544 1589 Unloaden weight ready for work 1114 1159 1134 1179 Loading capacity Loading capacity when using the TLC Permissible front axle load Permissible rear axle load...
  • Page 225: Ltr./132 Kw Tsi - Eu 5

    132/6200 Maximum torque Nm per rpm 250/2000 - 4500 4/1390 Number of cylinders/Displacement (cm Performances FABIA RS COMBI RS Maximum speed km/h Acceleration 0 - 100 km/h Fuel consumption (in ltr./100 km) and CO emission (in g/km) FABIA RS...
  • Page 226 Technical Data Weight (in kg) FABIA RS COMBI RS Permissible gross weight 1718 1713 Unloaden weight ready for work 1318 1313 Loading capacity Permissible front axle load Permissible rear axle load Depending on special equipment. Using the system Safety Driving Tips...
  • Page 227: 1.2 Ltr./55 Kw Tdi Cr Dpf - Eu5

    Power output kW per rpm 55/4200 Maximum torque Nm per rpm 180/2000 3/1199 Number of cylinders/Displacement (cm Performances FABIA COMBI COMBI GreenLine Maximum speed km/h Acceleration 0 - 100 km/h 14,2 14,3 14,3 Fuel consumption (in ltr./100 km) and CO...
  • Page 228 Technical Data Weight (in kg) FABIA COMBI COMBI GreenLine 1644 1664 1674 Permissible gross weight 1614 1619 1629 Unloaden weight ready for work 1189 1209 1219 Loading capacity Loading capacity when using the TLC Permissible front axle load Permissible rear axle load...
  • Page 229: Ltr./55 Kw Tdi Cr

    55/4000 Maximum torque Nm per rpm 195/1500 - 2000 4/1598 Number of cylinders/Displacement (cm Performances FABIA COMBI Maximum speed km/h Acceleration 0 - 100 km/h 14,1 14,2 Fuel consumption (in ltr./100 km) and CO emission (in g/km)
  • Page 230 Technical Data Weight (in kg) FABIA COMBI 1659 1679 Permissible gross weight 1629 1634 Unloaden weight ready for work 1204 1224 Loading capacity Loading capacity when using the TLC Permissible front axle load Permissible rear axle load (1000/500) (1000/450) Permissible trailer load, trailer braked/unbraked...
  • Page 231: Ltr./66 Kw Tdi Cr

    66/4200 Maximum torque Nm per rpm 230/1500 - 2500 4/1598 Number of cylinders/Displacement (cm Performances FABIA COMBI Maximum speed km/h Acceleration 0 - 100 km/h 12,6 12,7 Fuel consumption (in ltr./100 km) and CO emission (in g/km)
  • Page 232 Technical Data Weight (in kg) FABIA COMBI 1659 1679 Permissible gross weight 1629 1634 Unloaden weight ready for work 1204 1224 Loading capacity Loading capacity when using the TLC Permissible front axle load Permissible rear axle load (1200/500) (1200/450) Permissible trailer load, trailer braked/unbraked...
  • Page 233: Ltr./77 Kw Tdi Cr

    Power output kW per rpm 77/4400 Maximum torque Nm per rpm 250/1500-2500 4/1598 Number of cylinders/Displacement (cm Performances FABIA COMBI Maximum speed km/h Acceleration 0 - 100 km/h 10,9 11,0 Fuel consumption (in ltr./100 km) and CO emission (in g/km)
  • Page 234 Technical Data Weight (in kg) FABIA COMBI 1674 1694 Permissible gross weight 1644 1649 Unloaden weight ready for work 1219 1239 Loading capacity Loading capacity when using the TLC Permissible front axle load Permissible rear axle load (1200/500) (1200/450) Permissible trailer load, trailer braked/unbraked...
  • Page 235 Technical Data...
  • Page 236: Index

    Index Index Automatic gearbox ......98 Brake system Emergency programme ....102 Warning light .
  • Page 237 Index Children and safety ......130 Cup holder Electric sliding/tilting roof ..... 46 front .
  • Page 238 Index Exterior mirror ....... . 57 Ignition lock ........89 Exterior mirror heater .
  • Page 239 Index Lights MDI ........111 converting/masking over .
  • Page 240 Index Recommendation for changing gears ... 18 Setting temperature Temperature Air conditioning system ....84 outside .
  • Page 241 Index Tyres Wheel bolts lock ......190 Winter tyres ......182 Wheel trim .
  • Page 242 Notes Using the system Safety Driving Tips General Maintenance Breakdown assistance Technical Data...
  • Page 243 Notes...
  • Page 244 Notes Using the system Safety Driving Tips General Maintenance Breakdown assistance Technical Data...
  • Page 245 Škoda Auto pursues a policy of constant product and model development. We trust Reprinting, reproduction or translation, either in whole or in part, is not permitted that you will understand that changes to models in terms of shape, equipment and without the written consent of Škoda Auto.
  • Page 246 SIMPLY CLE VER ŠkodaService ŠkodaGenuine Parts ŠkodaGenuine Accessories...
  • Page 247 Look up „Environment“ in the Index to find out more. Please also refer to all the texts identified with a in this Owner's Manual. Make your contribution - for the sake of the environment. www.skoda-auto.com Návod k obsluze Fabia anglicky 05.10 S55.5610.06.20 5J6 012 003 GH...

Table of Contents