Skoda FABIA 2000 Workshop Manual page 65

FABIA 2000 1.4/55; 1.4/74 Engine - Mechanical Components
–
Connect pressure hose to compressed air (min. 6 bar
overpressure (0.6 MPa)) and remove the valve
springs with -MP 1-229-.
–
Pull off valve stem seals with extractor -MP 1-230-.
Installing
–
Insert the supplied plastic bushings on the relevant
valve stem. This will prevent any damage to the new
valve stem seal.
–
Insert the new valve stem seal -B- in the insertion tool
-MP 1-233-.
–
Oil the sealing lip of the valve stem seal and carefully
slide onto the valve guide -A-.
Further installation occurs in a similar way in reverse or-
der to removal.
–
Install cylinder head cover ⇒ Chapter 15-1
–
Installing the toothed belt and setting the timing
⇒ Chapter 13-1.
Edition 05.05
S00.5306.06.20
B
A
Repairing Valve Gear
MP1-233
S15-0161
15-2
page
15
9