Skoda FABIA 2000 Workshop Manual page 20

13
13 - Crankshaft toothed belt sprocket
pay attention to position of toothed belt when installing ⇒ 13-1 page 4
14 - 12 Nm
replace
15 - V-ribbed belt pulley
pay attention to locating element when installing
removing and installing ⇒ 13-1 page 4
16 - 90 Nm + torque a further
replace
tightening may occur in successive stages
the torquing angle can be measured with a commercially available angle measuring plate, e.g. -Hazet 6690-
17 - V-ribbed belt
before removing mark running direction
removing and installing ⇒ 13-1 page 2
Routing of the ribbed V-belt ⇒ 13-1 page 2
18 - Bottom toothed belt guard
19 - Console
Fig. 1: Routing of toothed belt
A - Coupling drive - Toothed belt
B - Main drive - Toothed belt
Removing, installing and tensioning the
toothed belt and inspecting the semi-au-
tomatic toothed belt tensioning pulley
Special tools, test and measuring equipment and
auxiliary items required
♦
Supporting device -MP 9-200-
♦
Pressure pad -T 30004- with replaceable stud
-T 30004-
♦ Camshaft lock -T 10016-
13-1 4
page
FABIA 2000
turn (90 °)
1 /
4
Disassembling and assembling engine
1.4/55; 1.4/74 Engine - Mechanical Components
Edition 05.05
S00.5306.06.20