Skoda FABIA 2000 Workshop Manual page 36

13
–
Lay the sealing flange with the front side on theas-
sembly device -T 10017- in such a way that the posi-
tioning pin -A- sinks into the hole -B- of the rotor.
.... or on the assembly device -T10134-.
Note
Make sure the sealing flange lies flat on the assembly de-
vice.
–
When tightening the knurled screws -A- press the ro-
tor -B- on the surface of the assembly device in such
a way that the positioning pin cannot slide out of the
rotor hole.
B - Mounting the assembly device -T 10017 - or
-T 10134- with sealing flange on the crankshaft
flange
•
The crankshaft flange must be free of grease and oil
•
The engine is in TDC for cylinder 1
13-2 8
page
FABIA 2000
Removing and installing cylinder block
1.4/55; 1.4/74 Engine - Mechanical Components
Edition 05.05
S00.5306.06.20