FABIA 2000
1.4/55; 1.4/74 Engine - Mechanical Components
–
Screw tester in the cylinder head instead of the oil
pressure switch.
–
Connect brown cable of tester to earth (-).
–
Connect diode test lamp to battery positive and to oil
pressure switch.
–
Start engine and slowly increase engine speed. Given
an oil pressure of 0.3...0.7 bar (0.03...0.07 MPa) the
LED must light up, otherwise replace the oil pressure
switch.
–
Increase engine speed further. At 2000 rpm and an oil
temperature of 80 °C the oil pressure should be at
least 2 bar (0.2 MPa).
At a higher engine speed the oil pressure must not be
greater than 7 bar (0.7 MPa).
Edition 05.05
S00.5306.06.20
Removing and installing parts of the lubrication system
17
17-1
7
page