Skoda FABIA 2000 Workshop Manual page 21

FABIA 2000 1.4/55; 1.4/74 Engine - Mechanical Components
Removing
–
Pull off hose -1- (for engines as of 04.02) and remove
engine protection -2- with air filter upwards -arrows-.
–
Remove V-ribbed belt ⇒ 13-1 page 2.
–
Remove top toothed belt guard.
–
Remove the front right wheelhouse liner ⇒ Body
work; Repair Group 66.
–
Position crankshaft on TDC cylinder 1. The notch on
the belt pulley must be aligned with the edge of the
marking -A-.
–
The locating holes in the camshaft sprockets must be
aligned with the fit holes in the cylinder head cover -ar-
rows-.
Note
If the locating holes are positioned on the opposite side
of the toothed belt sprockets, it will be necessary to rotate
the crankshaft a further revolution.
The engine must be lowered as described below in order
to be able to remove the belt pulley of the crankshaft:
Edition 05.05
S00.5306.06.20
Disassembling and assembling engine
13
13-1 5
page