FABIA 2000
1.4/55; 1.4/74 Engine - Mechanical Components
♦
Plug connection of the electric wiring to the radiator
fans
♦
Plug connection of the thermo-switch -F18-
♦
Plug connection of the electric wiring to the main
headlights and fog lights
Vehicles with air conditioning
WARNING!
Do not open the refrigerant circuit of the air condi-
tioning system. Therefore, when laying aside the
lock carrier pay special attention to the air condi-
tioning hoses, that must not be folded or exposed
to stress.
Note
To avoid damaging the condenser, wiring and air condi-
tioning hoses make sure the lines and hoses are not ex-
cessively expanded, buckled or bent.
–
Release the retaining clips of the AC system line.
–
Remove the V-ribbed belt ⇒ Chapter 13-1.
–
Remove connector from the AC compressor.
–
Remove AC compressor ⇒ Heating, Air Conditioning;
Rep. Gr. 87.
–
Tie up AC compressor to lock carrier.
Continued for all vehicles
–
Removing lock carrier ⇒ Body Work; Rep. Gr. 50 and
lay aside.
–
Disconnect the starter plug connection.
–
Disconnect the plug from the engine control unit -ar-
row-.
–
Disconnect 10-pin plug connection in left of engine
compartment and lay wiring loom aside.
Note
The assembly is removed together with the cable har-
ness.
Vehicles fitted with a manual gearbox
–
Remove shift cables of shift mechanism from gearbox
and place down to the side ⇒ Manual Gearbox 02T;
Rep. Gr. 34.
–
Remove clutch cylinder and lay aside ⇒ Gearbox
02T; Rep. Gr. 30.
Note
Clutch pedal must not be depressed.
Vehicles with automatic gearbox
–
Remove selector lever tension rod from the gearbox
and lay aside ⇒ Automatic Gearbox 001; Rep. Gr. 37.
Edition 09.03
S00.5306.04.20
Removing and Installing Engine
10
S10-0128
S10-0111
10-1
3
page