Checking Led Activity; Ap150 Status Leds; Figure 38 Ap150 Status Leds - Meru Networks AP150 Installation Manual

Checking LED Activity

Checking LED Activity
Access point status LEDs are provided on the Ethernet connector and on the face of
the AP150.

AP150 Status LEDs

Four status LEDs on the face of the AP150 also light, as shown in
.
Figure 38: AP150 Status LEDs
When the AP150 is first connected to the controller and any time the access point is
rebooted thereafter, the AP initializes with and then is programmed by the
controller. The Status LED (see
(Table
58 Meru Access Point and Radio Switch Installation Guide
10).
Figure 38) color reflects the various operating states
Figure 38.
Status LEDs
© 2007 Meru Networks, Inc.