Figure 7 Rs4000 Bracket Mounting - Meru Networks AP150 Installation Manual

Installing the RS4000
6. Screw in the screws most of the way, so that the screw head is about 1/16 of an
7. Mount the bracket on the screws, placing the circular portion of the keyhole
Figure 7: RS4000 Bracket Mounting
8. Tighten the bracket captive screws to secure the RS4000 to the bracket.
9. On the RS4000, attach the two antenna cables to the SMA antenna connectors
16 Meru Access Point and Radio Switch Installation Guide
inch from the wall.
mounts over the screw heads and sliding the bracket down.
Wall mounting bracket
(attached to wall)
labeled and
ANT1 ANT2
the cable ends clockwise until tight.
Captive screws (4)
on the top panel of the RS4000 (see
RS4000
R
P O W E
I
R A D IO
II
R A D IO
N E T
E T H E R
Figure 8) by turning
© 2007 Meru Networks, Inc.