Figure 12 Box Hanger Mounting Bracket Holes; Figure 13 Attaching The Mounting Bracket To The Box Hanger - Meru Networks AP150 Installation Manual

2. Unpack the T-bar hanger kit and unfold the legs of the T-bar hanger.
3. Locate the bracket mounting clip holes on the mounting bracket (see
Figure 12: Box Hanger Mounting Bracket Holes
4. Attach the U-joint of the clip to the T-bar and snap in place (see
.
Figure 13: Attaching the Mounting Bracket to the Box Hanger
© 2007 Meru Networks, Inc.
One hole attaches the bracket perpendicular to the box hanger. The other mounts
the bracket parallel to the box hanger.
Mounting bracket holes
Installing the RS4000
Figure 12).
Figure 13).
Installing the RS4000 21