Figure 11 Mounting The Rs4000 Above A Suspended Ceiling - Meru Networks AP150 Installation Manual

Installing the RS4000
Mounting Above a Suspended Ceiling
The optional T-bar box hanger mounting kit allows the RS4000 to be mounted above
suspended ceiling T-rails (see
hanger to the ceiling rails using clips. The RS4000 attaches to the mounting bracket
that is attached to the T-bar box hanger.
Note:
smoke-generating characteristics required by Section 300-22(C) of the National
Electrical Code (NEC) for installation in a building's environmental air space.
Additonally, you must use Ethernet cable that meets the requirements for operating
in environmental air space (in accordance with Section 300-22(C) of the NEC).
Any Fast Ethernet (FE) cables installed in air-handling spaces should be suitable
under NEC Article 800.50 and marked accordingly for use in plenums and air-handling
spaces with regard to smoke propagation, such as CL2-P, CL3-P, MPP (Multi Purpose
Plenum), or CMP (Communications Plenum).
Figure 11: Mounting the RS4000 Above a Suspended Ceiling
To mount an RS4000 above suspended ceiling rails:
1. Determine the location on the ceiling rails where the RS4000 will be mounted and
20 Meru Access Point and Radio Switch Installation Guide
The RS4000 and its antenna meet the requirements for fire resistance and low
Height adjustment screw
T-rail clip
Suspended ceiling T-rail
remove the ceiling tile.
Figure 11). The installation attaches the T-bar box
T-bar hanger
Mounting bracket
RS4000
Bracket mounting clip
Height
adjustment
screw
T-rail clip
© 2007 Meru Networks, Inc.