Table 8 Ap150 Installation Items - Meru Networks AP150 Installation Manual

Access point and radio switch
Hide thumbs Also See for AP150:
Table of Contents

Advertisement

Caution!
installed in the plenum space.
Note:
can secure the AP150 with a standard security cable, such as those used to secure
laptop computers.
The following recommended mounting locations provide the best reception for the
AP150:
On a horizontal surface, such as a table or a desk
On a vertical surface, usually a wall
Below a hanging ceiling
To complete this installation, you need the items listed in
Table 8: AP150 Installation Items
Installation Type
Horizontal mounting
Vertical mounting over a wall
stud
Vertical mounting on sheetrock
Horizontal mounting below a
hanging ceiling
© 2007 Meru Networks, Inc.
The AP150 is not certified for plenum installations, and should not be
The AP150 has two security cable slots (one on each side of the AP150) so you
Consumable Items Required
None
Two #6 x 2" wood screws for a wood stud; or
Two #6 x 1½" metal screws for a metal stud
Mounting bracket
Two #6 x 1" screws
Two #4-6 x 7/8" ribbed plastic wall anchors
Mounting bracket
Two caddy fasteners
Two plastic spacers
Two keps nuts (with attached lock washer)
Mounting bracket
Installation Requirements
Table
8.
Installing the AP150
49

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ap200Rs4000

Table of Contents