Figure 6 Bracket Attached To Rs4000 - Meru Networks AP150 Installation Manual

Figure 6: Bracket Attached to RS4000
2. Choose the location on the wall where the RS4000 will be mounted. The RS4000
3. Using the bracket holes as a template, mark the location on the wall for the two
Note:
common installations such as over a junction box, etc. This procedure describes only
the standard wall mount.
4. Drill holes at the locations you marked:
—
—
5. If you are using plastic anchors, install them in the holes.
© 2007 Meru Networks, Inc.
can be oriented in any direction, but it is probably more convenient if the SMA
antenna mounts are at the top. This orientation is more convenient for reading
LED status.
RS4000 bracket mounting screws. They are placed 5 25/32" (147mm) apart,
center-to-center, one above the other. If you are not using plastic wall anchors,
you must center the mounting screws on a wall stud.
The RS4000 mounting bracket provides holes to accommodate many types of
3/16-inch holes if you are using plastic anchors
1/8-inch holes if you are using only the screws
Installing the RS4000
Installing the RS4000 15