About An Hoffman/Nema Enclosure Installation; Table 2 Rs4000 Installation Tools - Meru Networks AP150 Installation Manual

Installation Requirements
You need the tools listed in
Table 2: RS4000 Installation Tools
Installation Type
Vertical mounting over a wall
stud
Vertical mounting on sheetrock
Horizontal mounting below a
hanging ceiling
Mounting above a ceiling tile

About an Hoffman/NEMA Enclosure Installation

The recommended RS4000 installation is a wall mount, but if necessary the RS4000
can be housed inside a protective NEMA or Hoffman box that is manufactured with
external corner tabs for standard wall mounting, above or below a ceiling. When
installing in the Hoffman/NEMA box, the RS4000 attaches to an optional
Hoffman/NEMA box mounting plate, which replaces the standard wall mount bracket.
Caution!
Laboratories.
Meru leaves the placement and orientation of the Hoffman/NEMA enclosure to the
customer. It will be necessary to drill holes through the plastic NEMA enclosure with
a Meru-provided template to enable the antenna and Ethernet cabling to exit the
enclosure. Instructions for performing this task are provided in the section "Creating
12 Meru Access Point and Radio Switch Installation Guide
Table
This method of mounting has not been evaluated by Underwriters
2.
Tools Required
Drill
1/8"drill bit
Screwdriver
(Optional) Pliers
Drill
3/16" drill bit
Screwdriver
(Optional) Pliers
Two caddy fasteners
Two plastic spacers
Two keps nuts (with attached lock washer)
Mounting bracket
Two T-rail clips
One T-box hanger
One bracket mounting clip
Mounting bracket
© 2007 Meru Networks, Inc.