Installation Requirements; Figure 32 Ap150 With Mounting Bracket - Meru Networks AP150 Installation Manual

Installation Requirements

Figure 32: AP150 with Mounting Bracket
Installation Requirements
If you choose not to use the AP150 mounting bracket, the backside of the AP150
contains two keyholes to accommodate a simple wall mount.
A mounting bracket can be used for many wall mounting configurations. The AP150
bracket mounting studs are placed so they can be used with brackets supplied by
other vendors or to replace an AP100. An array of holes on the mounting bracket (see
Figure
There are also holes for passing the PoE Ethernet or external power supply cable
through the bracket if the bracket is mounted on a junction box.
Additional optional mounting kits are available for mounting the AP150below a
hanging ceiling, using the mounting bracket.
48 Meru Access Point and Radio Switch Installation Guide
32) allow it to be mounted on the wall and over junction boxes or molly bolts.
© 2007 Meru Networks, Inc.