Table 3 Rs4000 Led Descriptions - Meru Networks AP150 Installation Manual

Table 3: RS4000 LED Descriptions
LED
Power
Radio I
Radio II
Ethernet
© 2007 Meru Networks, Inc.
Function
The Power status LED status is as follows:
off—power is off
solid red—when power is applied, system initializes for 40 sec-
onds and then the LED turns amber; after discovering the con-
troller the LED turns green. Otherwise, the system is in an
abnormal state (notify Customer Support).
solid amber—at any time, if this LED state persists longer than 40
seconds, notify Customer Support
solid green—system is fully operational
The Radio I LED is lit when radio packets are being transmitted and
when the radio is beaconing.
The Radio II LED is lit when radio packets are being transmitted and
when the radio is beaconing.
The Ethernet LED status is as follows:
off—no link
solid green—100Mbps connection
blinking green—transmit or receive activity at 100Mbps
solid amber—10Mbps connection
blinking amber—transmit or receive activity at 10Mbps
Checking LED Activity
Installing the RS4000 29