AP150
RS4000
RS4000
To reduce potential radio interference to other users, the antenna type and its gain
should be chosen so that the equivalent isotropically radiated power (e.i.r.p.) is not
more than that permitted for successful communication.
Europe—EU Declaration of Conformity and
Restrictions
This equipment is marked with either the CE Mark, the alert symbol, and the notified
body's number and can be used throughout the European Community. This mark indi-
cates compliance with the R&TTE Directive 1999/5/EC and the relevant parts of the
following technical specifications.
EN 300 328. Electromagnetic Compatibility and Radio Spectrum Matters (ERM).
Wideband transmission systems, data transmission equipment operating in the 2.4
GHz ISM (Industrial, Scientific, and Medical frequency bands in the range of 902–928
MHz, 2.4–2.485 GHz, and
5.15–5.25 GHz) band and using spread spectrum modulation techniques, harmonized
EN standards covering essential requirements under article 3.2 of the R&TTE direc-
tive.
EN 301 893. Broadband Radio Access Networks (BRAN). 5 GHz high-performance
RLAN, harmonized EN standards covering essential requirements of article 3.2 of the
R&TTE directive.
EN 301 489-17. Electromagnetic Compatibility and Radio Spectrum Matters (ERM).
Electromagnetic Compatibility (EMC) Standard for Radio Equipment and Services,
Part 17 Specific Conditions for Wideband Data and HIPERLAN Equipment.
EN 60950-1. Safety of Information Technology Equipment.
© 2007 Meru Networks, Inc.
Dual-Band Omni-Directional
SAA04-220050
Dual-Band Multi-Channel Omni-
Directional
MN-ACC-ANTRSO
Dual-Band Multi-Channel 180
MN-ACC-ANTRSOH
Europe—EU Declaration of Conformity and Restrictions
2 dBi
4 dBi
o
5 dBi
3 dBi
4.5 dBi
5.5 dBi
Regulatory Information
67