Alcatel-Lucent 7750 SR-OS Configuration Manual page 292

Clear Commands
interface-name — Clears ICMP6 statistics for the specified interface.
interface
Syntax interface [ip-int-name | ip-addr] [icmp] [urpf-stats] [statistics]
Context clear>router
Description
This command clears IP interface statistics.
If no IP interface is specified either by IP interface name or IP address, the command will perform the
clear operation on all IP interfaces.
Parameters ip-int-name | ip-addr — The IP interface name or IP interface address.
icmp — Specifies to reset the ICMP statistics for the IP interface(s) used for ICMP rate limiting.
urpf-stats — - Resets the statistics associated with uRPF failures.
statistics — - Resets the IP interface traffic statistics.
l2tp
Syntax l2pt
Context clear>router
Description
This command enables the context to clear L2PT data.
group
Syntax group tunnel-group-name
Context clear>router>l2tp
Description This command clears L2PT data.
Parameters tunnel-group-name — Specifies a Layer Two Tunneling Protocol Tunnel Group name.
tunnel
Syntax tunnel tunnel-id
Context clear>router>l2tp
Description
This command clears L2PT data.
Page 292
Default
All IP interfaces.
7750 SR OS Router Configuration Guide