Alcatel-Lucent 7750 SR-OS Configuration Manual page 500

IP (v4/v6) Filter Entry Commands
match
Syntax match [next-header next-header]
no match
Context config>filter>ipv6-filter>entry
Description
This command enables the context to enter match criteria for the filter entry. When the match criteria
have been satisfied the action associated with the match criteria is executed.
If more than one match criteria (within one match statement) are configured then all criteria must be
satisfied (AND function) before the action associated with the match is executed.
A match context may consist of multiple match criteria, but multiple match statements cannot be
entered per entry.
The no form of the command removes the match criteria for the entry-id.
Parameters
next-header — Specifies the IPv6 next header to match. Note that this parameter is analogous to the
Page 500
Protocol Protocol ID
eigrp 88
ospf-igp 89
ether-ip 97
encap 98
pnni 102
pim 103
vrrp 112
l2tp 115
stp 118
ptp 123
isis 124
crtp 126
crudp 127
protocol parameter used in IP-Filter match criteria.
Values
[0 — 42 | 45 — 49 | 52 — 59 | 61— 255] — protocol numbers accepted in decimal,
hexidecimal, or binary - DHB
keywords: none, crtp, crudp, egp, eigrp, encap, ether-ip, gre, icmp, idrp, igmp, igp,
ip, ipv6, ipv6-icmp, ipv6-no-nxt, isis, iso-ip, l2tp, ospf-igp, pim, pnni, ptp, rdp,
rsvp, stp, tcp, udp, vrrp
* — udp/tcp wildcard
Description
EIGRP
OSPFIGP
Ethernet-within-IP Encapsulation
Encapsulation Header
PNNI over IP
Protocol Independent Multicast
Virtual Router Redundancy Protocol
Layer Two Tunneling Protocol
Spanning Tree Protocol
Performance Transparency Protocol
ISIS over IPv4
Combat Radio Transport Protocol
Combat Radio User Datagram
7750 SR OS Router Configuration Guide