Table of Contents
Advertisement
mpls-labels
Syntax
mpls-labels
Context
config>router
Description
This command creates a context for the configuration of glocal parameters related to MPLS labels.
static-label
Syntax
static-label max-lsp-labels number static-svc-labels number
no static-label
Context
config>router>mpls-labels
Description
This command enables the range of MPLS static label values reserved for LSPs and for VCs
(pseudowires) to be configured. For LSPs, these ranges only apply to static MPLS-TP paths
configured under config>router>mpls>lsp.
Default
no static-label
Parameters
max-lsp-labels number — The number of static label values that are reserved for use by statically
static-svc-labels number — The number of static label values that are reserved for use by statically
multicast-info
Syntax
multicast-info-policy policy-name
no multicast-info-policy
Context
configure>router
Description
This command configures multicast information policy.
7750 SR OS Router Configuration Guide
configured LSPs. THe range is configured as follows: The minimum value of label is always 32.
The maximum value in the range is then 32 + number. The allowed values of number are as
follows for max-lsp-labels:
Values
0 — 131071 for chassis mode C (128k)
Values
0 — 261143 for chassis mode D (256k)
Default
992
configured VCs (pseudowires). The range is configured as follows: The minimum value of static
VC label is always [32 + max-lsp-labels + 1]. The maximum VC label value in the range is then
[32 + max-lsp-labels + 1+ number]. The allowed values of number are as follows for static-svc-
labels:
Values
0 — 131071 for chassis mode C (128k)
Values
0 — 261143 for chassis mode D (256k)
Default
16384
IP Router Configuration
Page 115
Advertisement
Table of Contents
