Alcatel-Lucent 7750 SR-OS Configuration Manual page 156

Router Interface Commands
egr-ip-load-balancing
Syntax egr-ip-load-balancing {src-ip | dst-ip}
no egr-ip-load-balancing
Context config>router>interface
Description This command specifies whether to include source address or destination address or both in LAG/
ECMP hash on IP interfaces. Additionally, when l4-load-balancing is enabled the command applies
also to inclusion of source/destination port in the hash inputs.
The no form of this command includes both source and destination parameters.
Default
no egr-ip-load-balancing
Parameters src-ip — Specifies using source address and (if l4-load balancing is enabled) source port in the hash,
dst-ip — Specifies using destination address and (if l4-load balancing is enabled) destination port in
enable-ingress-stats
Syntax [no] enable-ingress-stats
Context config>router>interface
config>service>ies >interface
config>service>vprn>interface
config>service>ies>sub-if>grp-if
config>service>vprn>sub-if>grp-if
Description
This command enables the collection of ingress interface IP stats. This command is only appliable to
IP statistics, and not to uRPF statistics.
If enabled, then the following statistics are collected:
Note that octet statistics for IPv4 and IPv6 bytes at IP interfaces include the layer 2 frame overhead.
Default
no enable-ingress-stats
enable-mac-accounting
Syntax [no] enable-mac-accounting
Context config>router>interface
Page 156
ignore destination address/port.
the hash, ignore source address/port.
• IPv4 offered packets
• IPv4 offered octets
• IPv6 offered packets
• IPv6 offered octets
7750 SR OS Router Configuration Guide