Common Configuration Tasks
Learning the Tunnel Endpoint IPv4 System Address
This configuration displays the OSPF configuration to learn the IPv4 system address of the tunnel
endpoint.
CLI Syntax: config>router
The following displays OSPF configuration information.
A:ALA-49>configure>router# info
----------------------------------------------
...
----------------------------------------------
A:ALA-49>configure>router#
Page 74
ospf
area area-id
interface ip-int-name
ospf
area 0.0.0.0
interface "system"
exit
interface "ip-1.1.1.2"
exit
exit
exit
7750 SR OS Router Configuration Guide