Table of Contents
Advertisement
Parameters
true — match if a packet contains Routing Type Extension Header type 0
false — match if a packet does not contain Routing Type Extension Header type 0
src-ip
Syntax
src-ip {ip-address [/mask]} [netmask
src-ip {ipv6-address/prefix-length | mask | ipv6-prefix-list prefix-list-name}
no src-ip
Context
config>filter>ip-filter>entry>match
config>filter>ipv6-filter>entry>match
Description
This command configures a source IP address range to be used as an IP filter match criterion.
To match on the source IP address, specify the address and its associated mask, e.g. 10.1.0.0/16. The
conventional notation of 10.1.0.0 255.255.0.0 may also be used.
The no form of the command removes the source IP address match criterion.
Default
no src-ip
Parameters
ip-address — The valid IP prefix for the IP match criterion in dotted decimal notation.
ip-prefix-list — creates a list of IPv4 prefixes for match criteria in IPv4 ACL and CPM filter
ipv6-prefix-list — creates a list of IPv6 prefixes for match criteria in IPv6 ACL and CPM filter
ip-prefix-list-name — A string of up to 32 characters of printable ASCII characters. If special
mask — Eight 16-bit hexadecimal pieces representing bit match criteria.
prefix-length — The IPv6 mask value for the IPv6 filter entry.
netmask — Any mask epressed in dotted quad notation.
7750 SR OS Router Configuration Guide
Values
0.0.0.0 — 255.255.255.255
policies.
policies.
characters are used, the string must be enclosed within double quotes.
Values
x:x:x:x:x:x:x (eight 16-bit pieces)
Values
1 — 128
Values
0.0.0.0 — 255.255.255.255
ip-prefix-list prefix-list-name]
|
Filter Policies
Page 509
Advertisement
Table of Contents
