Table of Contents
Advertisement
IP (v4/v6) Filter Entry Commands
nat — specifyies that matching traffic is to be redirected for NAT performed by Integrated Service
reassemble — Packets matching the filter entry are forwarded to the packet reassembly function in
filter-sample
Syntax
[no] filter-sample
Context
config>filter>ip-filter>entry
config>filter>ipv6-filter>entry
Description
This command specifies that traffic matching the associated IP filter entry is sampled if the IP
interface is set to cflowd acl.
If the cflowd is either not enabled or set to cflowd interface mode, this command is ignored.
The no form removes this command for the system configuration, disallowing the sampling of
packets if the ingress interface is in cflowd acl mode.
Default
no filter-sample
interface-disable-sample
Syntax
[no] interface-disable-sample
Context
config>filter>ip-filter>entry
config>filter>ipv6-filter>entry
Description
This command specifies that traffic matching the associated IP filter entry is not sampled if the IP
interface is set to cflowd interface mode. This allows the option to not sample specific types of
traffic when interface sampling is enabled.
If the cflowd is either not enabled or set to cflowd acl mode, this command is ignored.
The no form of this command enables sampling.
Default
no interface-disable-sample
match
Syntax
match [protocol protocol-id]
no match
Context
config>filter>ip-filter>entry
config>filter>ipv6-filter>entry
Description
This command enables the context to enter match criteria for the filter entry. When the match criteria
have been satisfied the action associated with the match criteria is executed.
Page 498
Adapter(s) running NAT application.
the system.
7750 SR OS Router Configuration Guide
Advertisement
Table of Contents
